Manufacturing Books

Right from the gitgo Ben Hamper's Rivethead grabs you with gritty gusto of passages such as the above; Hamper is an extraordinary writer about life for the ordinary guy... at least the ordinary guy who winds up as an automotive assembly-line worker for General Motors in Flint, Michigan--once considered the Automobile Capital of the World. The author is a natural shop rat, growing up in Flint, with an alcoholic mostly absentee father and a long-suffering, working-three-jobs mother trying to raise the family as practicing Catholics.

...

For my complete review of this book and for other book and movie
reviews, please visit my site [...]

Brian Wright
Copyright 2008

The endless monotony and idiot bosses drive anybody with an IQ above their shoe size to do something to kill the thought that, if they're lucky, they only have 30 more years of mind numbing drudgery to go before they can retire. I'm not saying alcohol abuse is the proper outlet, but it does seem to be the most common and most convenient. Good book, excellent portrayal of what exactly "blue collar America" does for a living.

Ben Hamper shares his life as a worker on the GM assembly line in Flint, MI. Bold, frank, honest and often hilarious. This book was recommended to me years ago and for some reason I never read it until now. Hamper chronicles a part of American history (manufacturing jobs) that seem to be going stateside or as Ross Perot once described in a quip about NAFTA, what's that whoosing noise? manufacturing jobs headed to Mexico. This is prose for the ages. Loved the book.

I didn't really like reading this book because I too work in a (once) major three Auto plant. I didn't feel that it properly portrayed some of the workers. It made it sound like all workers are like the author where they just really don't give a damn about anything except having a joking time on the job. It also made the workers sound like they were underachieving, undereducated, bottom of the barrel workers and I didn't care to have that stigma for all of us. I hold two bachelor degrees, like my job and take it serious!

I grew up with people like Ben Hamper in a place which was much like Flint. For the first couple years of my adult life, I did the kind of work he did. What he describes is the tail end of a lifestyle; the lifestyle of the shop rat. It's dirty, monotonous and smelly. Many of the people you work with are either below average in intelligence or in sanity. Drugs, booze and having no concept of "forethought" are fundamental parts of the culture. It's nihilism with a rivet gun. If you come from a place like that, chances are, your only way out is via a jail cell or a career in the military. Or, you could win a workmans comp suit. Which is presumably how Ben got out.

I miss rust-belt working class america. It's a hard life, and it doesn't have much in the way of rewards, but the people who make it up are genuine in ways that others are not: they have a lot of heart and spirit. Ben's book brought it all back in a great galloping rush of memories. If you've ever wondered what the factory working classes are, or at least were like (back when we had factories); read the book.

Tim Harrower provides a very practical guide to newspaper design. The art of newspaper design tends to be very subjective, so this book lays down some facts and guidelines to put to rest some of the indecisive elements of design.

For a beginner, this is a book that will give you the confidence and understanding to conquer page layout.

The CD gives the novice an even more practical guide than the book can deliver.

One criticism is that the book is printed on light gloss stock and is spiral bound. I am not sure how it was survive rough treatment.

Brian Hurst

This textbook is awesome. I've never seen a better textbook. It lays everything out, and makes it simple to understand. It tells you what to do and what not to do in simple language and clear pictures. It's one of few textbooks worth keeping for future use in your career (provided you're going into the newspaper industry)!

When I accepted my first "real" job in journalism as a page designer for a local weekly I was struck by a horrifying thought, I really knew nothing about newspaper design. I had done it before for my college paper, sure, but this was the big time. I needed a refresher course and I needed it fast... Tim Harrower and this spiral-bound book came to my rescue.

Although it was first published in 1989, this book will be relevant as long as newspapers exist, even in this age of computer design. Harrower explains and shows why certain designs are good and bad and he approaches it in a situational, problem-solving format. For example, he explains what should be done when you have to design a page with no art, when you have butting headlines, or two horizontal photos etc. Harrower says that most page designers stumble into the job and from this point of view he explains what exactly, a good design is. This book will always be on my desk.

(I wish my publications professor used this instead of the worthless $105 monstrosity he made us buy (and that we never used by the way).)

So, after some mild freaking out followed by a lot of reading, I can start my new job with confidence thanks to this book.

I ordered the hardbound and got the spiral bound, a product worth $12 less. It was then that I discovered there is no way to express a complaint to Amazon: no phone number, no email address, no human help. All that is available is a maze of pre-written web help, none of which includes "credit my account $12, since I don't want to go through the hassle of sending this book back." What's up, Amazon? Don't you want satisfied customers? I spend literally hundreds here each year. This egregious deficit needs to be fixed immediately. Otherwise, I highly recommend this book.

I am an editor these days.
I came on this book quite a few years ago when I was a sub. It was recommended to me by an old hand in the newspaper game.
Without doubt, it is the single best aquisition I have made in terms of newspaper design.
In the places I have worked, I have been regarded extremely highly for my layout skills.
This book, with a little creativity, is the basis of almost everything I do in terms of layout.
If you are serious about the newspaper game, get it, study it and then apply what you learn. It will help our career enormously.

In today's atmosphere to do more, with less, faster, with better quality, this book was a true insight into making an organization leaner.

For the past year we have been focused on the Kaizen approach to process improvement; that is the focus on the outside consulting firm that we chose several years ago. Sustaining change, measurement, and ownership of improvements might actually be regressing. While not giving a roadmap to success, this text affirms the missteps that we are experiencing and it has motivated me to take a broader, less event-focused approach. This would not be a strong text for the professional consultant, but for the leader attempting to assimilate change in a corporate culture and for someone who's been standing on the roadside with their 'lean' thumb out and wondering why no one will stop this provides a good review and simple checklist approach. My outside consultants will regret that I read this book.

Allthough the book is fairly short and a fast read in that I think it makes great job in really explaining the thinking behind lean. There are practically no focus on specific application of tools. And that is not a bad thing. Lean suffers from too tool based approach and I think that this book should be on a reading list before tool specific books (not saying that they don't have their place also).

I recommend this book for anyone considering Lean. I am buying it for all department directors. It gives the good and the bad, not just the good. I believe it will help people avoid making mistakes if they decide Lean is for them. A good overview of what to expect and gives examples average readers can understand. Highly recommended.

This is an excellent book, and essential reading for Lean leadership. It is also a good starting point for any Lean practitioner or anyone taking on a major change effort. Before diving deep into the problem solving tools and systems of TPS, a study of The Hitchhiker's Guide to Lean and the lessons contained within it will give you many tips for your journey. This book is clearly written, and well thought out. Each chapter offers 5 solid things to meditate on and put into practice. The passion and conviction of the authors comes through strongly. What U.S. industry needs are more thinkers and teachers like these.

It's hard to justify $85 for a jewelry book, but this combines history, technique and art in one book. If you intend to work with jewelry professionally, or are a very serious jewelry student, it's wise to get this book. You won't get the step-by-step techniques, but you'll get enough background technique you'll be able to wing it, usually sucessfully. He covers the international world of jewelry, so it has everything from ethnic tribal to Danish contemporary, and all the stuff inbetween. I sit down with this book periodically to just enjoy the book, and I always find something 'new' I want to try. Many times I use it a reference for finding the basis of a technique, or a particular table that has the info I require. Whatever it is that I need, I can find it in this book. It's worth the $85 and you won't regret the decision.

This one expands on were he stopped with the first book. 19 chapter headings with a multitude of sub headings.

* The Message of Jewelry, why we wear ornaments
* The Means to Creation: working environment, facilities and implements
* Metal, the Jewel's Raw Material: Its origin, quality control and variety
* Basic Techniques: processing sheet metal without deformation
* Sheet Metal: Forming by deformation techniques
* Wire: The uses of drawn or extruded flexible filaments
* Tubing: The use of Fistular Forms
* Surface ornament with out heat: Metal removal techniques
* Surface ornament with heat: Metal fusion techniques
* Fabrication: Building fragments into units
* Casting: Methods of giving form to molten metal
* Natural Materials in Jewelry: Using natures valued nonmetals
* Stones and their setting: Inorganic minerals employed in jewelry
* Metal Finishing: Achieving desired surface appearance
* Metallic Coating Techniques: Changing the base metal's surface appearance
* Metallic Buildup: Electrolytic molecular creation of surface and form
* Coloring Metals: Achieving patinas through heat, chemicals and electrolysis
* Standard weights, Measures and Tables
* Glossaries, Bibliographies, Sources of tools, supplies and services: USA and UK

Around 800 pages of pure golden info, I have read and keep finding new and interesting things since I picked up a copy last year. I find this gift keeps on giving every time I pick it up. He goes into detail that others can only dream about.

This book isn't only for jewelry artists, anybody that is into the metal arts working or a collector. This will give years of educational enjoyment. It is truly an investment grade book of knowledge. I use my copy on a metals arts forum for answers to question from people that are looking for answers that can be counted to be correct.

This book is the jewelry makers bible. I cannot begin to scratch the surface of its value by lising content. It is a gem of a book (pun intended).

Oppi Untracht did the jewelry industry and anyone serious about learning jewelrymaking the right way, a HUGE service by compiling the information in this book and presenting it in clear and easy to understand language. This book must have taken years of research and editing to produce and publish. That, my friends who harp about price, is why this book is so high priced. It is not over-priced, it is aptly priced. Think how much the Oxford English Dictionary costs- [...]
it's just words, why so expensive?!

You could learn a new technique or factoid every day for a year from this book and then start all over again and learn even more.
This book, however, is not for teaching silver or goldsmithing, gem setting, etc. It is not a how-to book at all. It is a reference book, like the ones that the library won't let you check out because they're too valuable.

If you are serious about jewelry making, fine and art jewelry- not hobby craft wire and bead stringing- put this on your wish list. You'll be thrilled if someone sends it to you for a birthday or holiday gift. If nobody will kick for it, save your nickles and find a used one, reclaiming the silver from spent pickle solution and making solder from scratch never goes out of style.

Jewelry Concepts and Technoloty by Oppi Untracht is the must reference text for the jewelry artist. Untracht provides historical reference for styles and techniques, clearly explains how various techniqures can be utilized by beginners, advanced art jewelry students and professionals. If that is not enough, the visuals and historical references stimulate the imagine.

This book was purchased to replace a book lost out of our Mineral & Gem Society library. We have many master gemologists and geologists in the club and each speaks highly of this book. It's full of basics but also provides information for the advanced jeweler. Highly recommneded.

As a child of the 60's growing up in England, I was exposed to a lot of American popular culture and toys.
"Major Matt Mason" and "Zeroids" were some of my favourites. This book gives me an excellent reminder not only of what I had, but also stuff I never saw or even knew existed!
This book is well produced with magnificent colourful photos, but they are let down a little by the matte paper used for the pages that dulls their brilliance. Also, some images suffer from "the jaggies" caused by low resolution of the originals.
Likewise, the layout and text is often jumbled and there are some annoying factual errors.
Also, if the author had a rudimentary knowledge of 50's Hollywood monsters he would have recognised the inspiration for many of the Colorforms Outer Space Men.
Apart from these minor annoyances, this is the book I have been waiting for, for almost fourty years!
"Space Toys of the 60's" is worth every cent, even if only for the photos of the magnificent package and box art!
Those colourful boxes are always the first thing to be discarded by young hands too eager for adventure in space!

This oversized, full color paperback is not a glossy coffee table book. Neither is it a collector's price guide. Instead it's an impassioned and informative discussion of three collectible toy lines: Major Matt Mason (Mattell's Man in Space), Colorforms aliens and my favorite, Ideal's Mighty Zeroids.

I read and learned a lot about the other two toy lines, but I used this book when buying a Zintar Zeroid on E-Bay (for only thirty times the original price of $5, which shows how rare they are). Before that I read the book over and over, looking at the photos and dioramas from catalogs. Gillam even includes pre-release pictures from wholesale toy guides of what these toys might have looked like, as well as extensive photos of alternate versions.

Interest in Matt Mason has never flagged, and Zeroids are once again coming into their own in the world of retro toys (see the Zeroid movie link under Robot Links at alivingdog.com). They represented a high point in Ideal's Motorific line of cars and later boats and cleverly ran on the same replaceable motor. Anyone interested in these three lines, or the history of toys, or just taking a trip down memory lane will enjoy this inexpensive and captivating book.

I bought this book on ebay from the author and I am very happy with it. It is loaded with pictures of each space toy and has nice text. Some toys are shown in their original package. Best book I have bought in a long while.

A Collector's Guide to Major Matt Mason, Mighty Zeroid Robots and Colorforms Outer Space Men. Veteran collector and author James Gillam details the story of toys inspired by NASA ventures into space.

SPACE TOYS OF THE 60's could have been the Major Matt Mason collector's dream come true. However, be warned that the quality of the paper and the image quality of the photos is not very good. I wish the publisher had done a much better job and creating some high quality images that I would want to look at over and over again. Looking at these pictures, as a substitute for expanding my collection, is not fullfilling.

All in all though, being the ONLY book out there right now with any information on Major Matt Mason, this is a pretty good book. At leaset it has photos of all of Mattel's Major Matt Mason - Man in Space figures, vehicles and buildings with detailed descriptions, construction and instruction sheets, product catalogs, collector's reminiscences, prototype information, and company histories.

If you can find a used copy for around $5 it's worth adding to the library as a reference.

...than this "Time Machine" that Mr. Gillam has produced. He left no stone unturned. Covered ALL details and variations very thoroughly. I discovered 3 OUTER SPACE MEN in my attic and a Scorpio in my basement. When I was looking for a reference guide to these 60's Spacemen, I coincidentally saw "SPACE TOYS OF THE 60's" on EBay. I said it, you'll say it: "That's how I would have done it!"

My wife and I love to go on factory tours and visit company museums when we travel. It's corny, I know, but fun. This book gives wonderful examples of some of the best tours and museums around. Whenever we're going on a road trip, we always consult Watch It Made in the U.S.A.: A Visitor's Guide to the Best Factory Tours and Company Museums (Watch It Made in the USA) to help us decide where we might like to go. I would very much recommend it for families with young kids who might enjoy such tours, and probably retirees who have the time and interest for them, as well.

This is an excellent book for anyone who is interested in things made in the USA. It gives a nice description of the facilities, locations, tour times, cost and lengths, age appropriateness, and phone numbers.
We like to travel the country and will use the information to plan our trips. The book is well organized and very helpful.

This is my first review in Amazon.

I am always curious about how things are made,
and after watching many episodes of "How do they do it",
and "How it's made" on discovery Channel.
I started to look for extra resources for a better understanding on these "behind the scenes" mysteries.
Then, I found this book.
And this book is a real treasure!
The book is well organized,
It provides many detail information about the factory tours,
and the brief background of the companies.

Thanks to this book,
now I have some itineraries in mind.
I plan to visit KitchenAid's factory in the near future for my mom.
(My family is in Taiwan)
She is a big fan of KitchenAid mixer. ha.
I will also visit Airstream company as well,
Owning a travel trailer is my dream, and I want to know how it is made,
And I will be more determined to realize this dream!
Maybe one day I will write a similar book "Watch it made in Taiwan" in a mobile trailer office. Who knows?!

Great book, I did not know that a book like this existed. Will definitly come in handy when planning trips. Checked information on places we have already been and information was accurate.

I'm planning to take my two teenagers cross country this summer and this is a GREAT book for finding interesting places to show them. It has excellent maps, clear directions, and well-written descriptions of what you will (and won't) see so I can figure out what sites will best entertain the different family members. I only wish we had time to see more of the places they describe. It even tells you what other nearby attractions there are. Kudos to the authors!

This book is NOT the Ultimate Barbie Doll Book. I could not find a single collectible Barbie Doll which I posses from the years it describes it covers when I purchased it. Description of the dolls covered should really be more detailed for collectors who are new to the industry. In addition, there is no option to select from Amazon if the item described does not meet your needs, you simply get a refund, minus shipping as a user error...Not too fair in my opinion.

This is the best Barbie identification book out there. It's useful to identify those thrift store and garage sale dolls and their outfits. Each item is also described with identifying marks, etc. I have owned this book since it came out and it's the one I go back to the most, for complete Barbie information.

I love my new Ultimate Barbie Doll Book. I still have my first Barbie Dolls from the early 60's along with Ken, Midge & Skipper. I have over 100 dolls and found them all in this wonderful book. The photos are beautiful. The Barbie novice to enthusiast will truly enjoy this book.

If you're looking for help in identifying your Barbie doll and friends then this book is for you. I collect old barbies and I have found this book to be most helpful.

I mainly purchased this book to remember some of my childhood toys- I wasn't expecting the detail and page after page of pictures that made me interested in collecting Barbie's as well-

This thick hardcover book has colored photos of each Barbie both in the box and then a close up of the face. The Barbies are presented in chronological order by year by doll type- so i.e. Barbie from 1950s til 90s then Skipper from 50s-90s, then Ken, etc.

The book also has friends of the infamous Barbie and Ken couple; many of which I have never seen or heard of!

If you are looking for a nice photo array and price guide of Barbie and Friends. Truly the "Ultimate" Barbie book.

The Lunar Module (LM) is an incredibly complex engineering marvel that was used as a temporary home for 12 astronauts on the harsh lunar surface. It was also a landing vehicle and a launch vehicle. As an engineer by education and experience I find this vehicle breath taking.

It is fascinating to see the complexity of all of the systems on the LM. Extremely well illustrated, this book provides an excellent overview into the work that went into developing the vehicle. One can see by the sophistication of the LM that the training necessary for the astronauts to competently operate it was serious business. Even more amazing is that this is just the high level view of this marvel. Each of the systems: Radar, propulsions, life support, instrumentation (and more) have many more layers of complexity!

This book and Virtual Apollo about the command and service modules (also written by Scott Sullivan) are both worth the read for anyone interested in the space program or engineering marvels, or both!

Virtual Apollo: A Pictorial Essay of the Engineering and Construction of the Apollo Command and Service Modules: Apogee Books Space Series 30 (Apogee Books Space Series)

The Re-Discovery of Common Sense: A Guide to: The Lost Art of Critical Thinking

This book is how I'd like to see a lot of other aerospace subjects covered. It gives a vivid and easy to understand perspective of all the little ins and outs to the subject. The level of detail is unprecidented outside of an engineering office. The autor obviously has a love affair going on with autocad.

I always wondered what the heck is behind that flat panel on the back of the LM ascent stage. Now I know! And you could too if you buy this book.

This book is great! The renderings are very thorough. My one regret is that I wish there were more photographs of the items that were rendered. But this being the internet age, you can find most of those on the web!

"Virtual LM" provides a detailed pictorial explanation of the Apollo Lunar Module and its "baggage" - the ALSEP packages and Lunar Rover. Carefully drawn color-coded diagrams explain the structure and systems of the Lunar Module, showing detail from several different angles. If you have an engineering bent, and love (or need) to know how things work, this is the book for you. If you want an overview of the Lunar Module - this book gives you more detail than you will ever need to know.

The Apollo Lunar module was born from the concept that a single lunar vehicle would be too large for any rocket booster concepts at the time. A man named John Houbolt persued an idea that if 2 vehicles could rendezvous in lunar orbit vs. trying to build a complex lander and orbiter in Earth orbit, a single, smaller launch vehicle could do the mission.
NASA bought into the revolutionary idea in 1962, and the race to the Moon began in earnest.

Scott Sullivan has produced a beautiful testimony to the first manned spacecraft to land on the Moon. This book will be "must buy" for all the engineers that will build the new Orion Lunar Lander. Sullivan shows in beautiful illustrations what was put and where on this ungainly vehicle that was never designed to return people to Earth. His masterful use of pictures and text pulls back the foil, so to speak and lets the reader discover the simplicity that allowed the eagle to land. He shows the differences between each LM, and where they put the car!!!

An excellent companion to HBO's miniseries-"From the Earth to the Moon".

Let me first say that I have a ton of vintage jewelry in my personal collection and I also sell it in our family owned antique store. I purchased this book and read it from cover to cover. WOWOW, what a great book. So much great information and easy to read. These girls did a wonderful job in the layout of this beautful book. The pictures to say the least are all stunning and really show up great in their book.
I would recommend this book to anyone that has ANY kind of interest in vintage jewelry. This book really explains how different designers tried to copy the Haskell style. Great reference on how to date pieces and also identify key Haskell style trademarks.
Thanks for a wondeful book!

Serious collectors must have this book on their shelf. Close-up photographs show the jewelry's intricate designs in detail.

This is a fantastic resource book for the Vintage Jewelry Collector or Seller. It is wonderfully organized & beautifully illustrated with many large color pictures. The descriptions are concise & precise. Values are given after each description.
There is also a wonderful & informative section on Identifying & Dating Haskell Jewelry~vintage to present~including clasps & materials. This section also has clear close-up photographs.
I feel it is an invaluable tool for the serious collector. And well worth the investment!

This book is one of the finest that I have seen. The illustrations are beautifully done. You almost want to frame
the water colors. There is an interesting history of the
Miriam Haskell jewelry, and the descriptions of the jewelry are
well done. I highly recommend this book to any vintage jewelry collector, especially those of you who like the Haskell line.

Carolyn Meadows in Virginia,USA
Antique13pink

Dealing with jewelry is both to me, profession and hobby. So I also like reading books about the stuff I love, and this one really got past my expectations. It helps getting insight not only in a really interesting branch of the jewelry business, but tells also about the people behind the design. At the same time, the author manages to give a helpful guide to the ambitioned collector of that kind. The book reminds one how much fun it is to create and wear exceptional pieces and tells some stories that are connected with those. The pictures are magnificent. This book is motivation for new ideas and simply fun to read.

This book is the BIBLE for understanding and building your telescope. An absolute must read.

I am a beginning amateur astronomer, and this book has helped me immensely in understanding how telescopes work and what goes into building a quality telescope. Though I won't be able to afford the optics for my dream telescope for some time, this book is excellent for either the aspiring telescope maker or an amateur like me who wants to understand what makes telescopes "great" vs. "so-so".

The book is well-written and is a very easy read, even though it goes through some fairly complicated stuff at times. I highly recommend it!

This book is available directly
from the publisher for $29.95 at
http://www.willbell.com/tm/dobtel.htm

One of the hardest things a beginner faces when jumping into amateur astronomy is "Where do I start?". That question has been answered in great depth by this book. Considered by almost everyone to be "the bible" of amateur telescope making, if this book doesn't inspire you to start cutting wood, then you need to find yourself another hobby!

One of the authors is responsible for the "Obsession" line of high-end Dobsonian telescopes. This book is almost a step-by-step guide on how you can build your own large Dobsonian, with optics and performance nearly as good as an Obsession. Yes, you probably won't save much money over a purchased 'scope, but the pride of being able to say "I built this myself!" more than makes up for that. Plus, you will know (and understand) every single square inch of your telescope, so modifications and changes won't be as frightening to you as they would if you had to cut into a $3000 commercial telescope.

If you think you're going to use this book and build an 18" 'scope for $500, you're going to be in for quite a shock. The authors in this book both stress the importance of premium optics, and these do not come cheap. Expect to spend roughly $1500, or more, for a good quality 12.5" primary mirror alone. Quality doesn't come cheap, and with the only commercial Pyrex production line in the US shut down for the next several years, expect mirror prices to rise, drastically.

For those who can afford it, a scope like this can last for a lifetime. But if you can't afford such a huge investment, this book also covers construction of an 8", closed-tube Dobsonian (The larger sizes in the book are all truss tube models), which can be assembled for roughly $600.

Right now, several of my friends and I are starting to plan our dream scope, using nothing but this book as a reference guide. We're going to build slowly, completing one major piece at a time. This both insures that the finished unit is as high a quality as we are capable of producing, plus helps to defer construction costs over a longer period of time.

Even if you have no intention of every getting a Dobsonian, you will find many things of value in this book.

Why are you still reading this? Go and order a copy for yourself. Experience firsthand just how well written and useful it really is, and I'll bet you also start dreaming of cutting wood and aligning optics.

If you are interested in building a Dobsonian with professional results, this is the book for you. It even excercises pragmmatic guidance on what aperture should one choose by describing a series of scenarios one would not contemplate before building, but would clearly regret in the after.This is specially useful for those suffering from "aperture fever".

The author wisely leaves aside the craft of making your own optics. He reduces it to one chapter. The reason: if you you want to build a serious and large aperture telescope; buy the optics. This, with time and experience, comes as the best option.

Nothing is left aside on what building a Dobsonian may concern. I honestly didn't look for anything else after this book. (The only thing I surfed the internet for was for more images on Dob designs).

This is a rare book, for it accomplishes to fill virtually every doubt you may have on the subject.