Computer Science Books

This is the wrap-up volume of the author's "Bromeliad" trilogy (the title of which has to do with tiny Amazonian frogs living in tree-top flowers, who know nothing about the world at large, or even that it exists) -- though it runs parallel, actually, to the second volume, which followed the exploits of Grimma and the nomes who stayed behind at the quarry while Masklin and a couple of others went to investigate the nearby airport. Now it turns out that, in their quest for the Ship waiting for thousands of years somewhere out in space, the three bickering adventurers have managed to stowaway aboard the Concorde and have gotten to Miami and then to Cape Canaveral. There, they meet other nomes, much more widely traveled than themselves (thanks to migrating geese), get close to a rocket launch, and make use of the Thing to contact the Ship. As always, Pratchett tells a delightful, very humane story with lots of humor (the nomes tend to be VERY literal), while at the same time commenting on subjects like interspecies relations, religious dogma, and the whole point of society. Written for adolescents but enjoyable for any thinking reader.

DON'T READ THIS BOOK INTILL YOU READ THE FIRST TWO BOOKS IN THE BROEIMLEAD TRILOGY. This book is about when Masklin (a nome) trys to find this one ship that while supposedly send the nomes to a different planet. This ship is faster than light. The one thing that leads them their is a thing. This thing is like a box with lots of electric inside, and only if this thing is by something that is powered by electric it works. Now in this book Masklin, Gurder, Angalo, and the thing go out to find the ship. At the beginning they fly on a airplane to Florida. When they get their they find more nomes (which they never knew that there was any other nomes). Now they have get the ship to them somehow. Read this wing of a book to find if they find the ship.

My Dad has been reading Terry Pratchett books and he thought I'd like this one. He was right! You should read this book , because it is very funny and exciting. The book is about three nomes that got stuck on Earth and need to take a space shuttle home. The nomes get a lot of useful help from Thing, a machine. But too bad when Thing runs out of "pow" (power)!
I don't have the first two books from this trilogy but I am getting them next!

In Diggers, the nomes living in a quarry found themselves besieged by humans. In the end, Masklin rescued them with nothing short of a miracle. This book is the story of that miracle.

This book is so funny that I often found myself laughing out loud while reading it. Not only that, the action is gripping, and the ending is touching. This book is a wonderful buy.

The Bromeliad trilogy soars to a grand finale with "Wings," the companion volume to "Truckers" and "Diggers." This tale runs parallel to the second book of the series, and brimming over with Terry Pratchett's usual wit and satire... and a mild dose of insanity.

Now that humans are returning to the quarry where the tiny nomes live, the nomes must somehow find a new place to live -- and fast. So Masklin is following the instructions of the Thing (a computer who is smarter than all the other characters put together) and going on a secret mission with Angalo and the Abbot to Florida.

After they sneak aboard the Concorde, freak out the stewardess and hijack the plane, the nomes learn that none other than Richard Arnold (grandson of Arnold Bros, founder of The Store) is on board. Now they must somehow send the Thing into space, so it can contact the spaceship and whisk the nomes away. Easy? No way.

Technically, anybody who has read the end of "Diggers" will know exactly what will happen in "Wings." But like flying on the Concorde, it's the ride that's half the thrill. "Wings" is a little tighter and funnier than its predecessors, partly because it has a much smaller cast -- the small bickering trio, plus the Thing. It doesn't get much better than that.

The nomes are fun protagonists, partly because they're so likably naive about the world in general. If they were left alone, they would probably produce a cute little civilization, and their naivete produces plenty of entertaining humor (Concerning the sound barrier: "All right, own up. Who broke it?"). Pratchett manages to make us laugh with the nomes, not at that.

The long-suffering Masklin has a new slew of problems the moment he leaves, ranging from the Thing refusing to talk to him to Angalo razzing the stewardesses. Atheistic Angalo and the abbot just avoid biting out each other's throat. But it's the Thing's dry, superior guidance that really steals the show.

Pratchett brings his Bromeliad trilogy to a close full of action, suspense, and frogs. A witty and wild ride on the Concorde, and not one to be missed.

It's too bad that versions of software change so fast because this is a great book! I still find myself referring to it even though I've used Acrobat since the dawn of time. Of all the books you can get, this is the one to spend your money on!

I have to concur with the NY reviewer who said this is a manual that all others should aspire to. How to's and examples are often presented in multiple forms to aid in understanding. The illustrations are clean, clear, and exremely helpful. The writing is concise, clear, and actually fun to read! The included CD presents wonderful examples of state-of-the art pdfs. While hardly a geek, I found myself reading the book before bed at night simply because it was so interesting! Kudos to the authors! I highly recommend this book not only to anyone wishing to learn everything worth knowing about Acrobat but also to anyone who aspires to write a similar text. It's a master class in information presentation as well as how to produce pdf's.

I create PDF multimedia presentations and I own every book available on Acrobat 5.0+. Master Class is by far the best reference I own in terms of practical information.

If you're creating complex forms or trying to master Javascript, you'll need Padova and Deubert, too. But if you're looking for ideas on how to create presentations that blow people away, this is the book to buy.

I bought four books on Acrobat 5, and this one is by far the best. It is written conceptually. It appeals to the senses as well as providing an education. Taking vast amounts of information and refining it so that it is presented simply yet thoroughly. I enjoy reading it.
I also bought Classroom in a book by the Adobe Creative Team and it is work. I am sure over time I will derive a lot from it, but Master Class is fun. You would never know that your working because you are too busy seeing all the cool stuff you can do with Adobe 5 and how to do it.
I also bought Real World PDF with Adobe Acrobat 5 by Anita Dennis, Industrial Strength Production Techniques, and that is a book for advanced students. It explains everything clearly, and is a big benefit for explaining the details on how to fit Adobe PDF into your print production overflow.
Adobe PDF is so much more than simply converting your files. It appears simple on the outside, but when you read Adobe 5 Master Class, you will be enthralled with how much more it does. Highly recommended for beginners and advanced students.

It was tough to decide if this is a four-star or a five-star book. Four and a half stars would be my preference.

At any rate, if you can afford only one Adobe Acrobat 5 book, you might be better off buying Acrobat 5 Hands On Training (HOT). I recommend, though, saving up enough money to get every book on Acrobat you can, for it is the wave of the future and a must for anybody wanting to put information-interactively on the web - my term is info-tivity - and the best thing this Hypercard pioneered the process at Apple's MacIntosh.

There probably is not single more valuable software tool for making money than Acrobat and I will be upgrading to version 6 as soon as I return stateside. That's the good news - the bad is that I will likely have to upgrade my library to keep in tune with the changes in this great software.

Back now to the review - if you intend to post any video, animation or audio on the internet you simply are going to have to purchase this book.

Further, if you are going to self-publish any sort of periodical on the web, you will definitely want to download HOW NOT TO START A MAGAZINE. by B. Ann Bell. Then, go read HOW TO START A MAGAZINE, STARTING & RUNNING A SUCCESSFUL NEWSLETTER OR MAGAZINE, PUBLISH YOUR OWN MAGAZINE, GUIDEBOOK, OR WEEKLY NEWSPAPER, and PAPERLESS PUBLISHING and do a google search for the soon-to-be LJs BREAKING FREE$.

Yes, that list is long but each of these is a valuable source of information for anyone trying to make money by publishing on the internet - Bill Anderson (LJ).

An excellent step through Cisco networking. This book begins with the definition and ends with future development. All aspects of high speed networks are covered along the way.

John has succeeded in making the whole complicated area of what happens behind the computer seem easy to understand. He has explained how to use technology to one's advantage and understand the value of doing so. A well recommended read.

I gave the book as a gift to a friend who is the CIO of an ISP and I know he went out , bought 10 more copies for all of his managers and thanked me with a note saying the John Vacca book is a God sent for his business. What more can I say

With the rapid advances in technology, upgrading of high speed networks will occur sooner rather than latter. High-Speed Cisco Networks by John Vacca provides experienced networking professionals with a step by step approach to all they will need to know about Cisco's LAN and WAN systems. It is the reference tool to use to understand the Cisco products so that planning, designing and implementing a high performance LAN or WAN system can commence.

I have been working in IT & network support for some years now, and am currntly untaking the Cisco Acadmey programs. This book turned up at the right time, as it explains things with greater clarity than anything else I have found. The presentation is logical and of a linear manner, making this my first choice in reference material, for both my studies and professional undertakings.

This book was an oasis in the desert of COM/CORBA obfuscation and confusion. This is the most fair, useful and easy to comprehend overview of these two models that I've come across. The author has the ability to convey the material in a way that makes it almost painless to comprehend...buy the book NOW.

Though not explicitly meant to be this book might also serve as an introduction to both CORBA and COM: quite an achievement. The authors waste no words and keep a neutral standing between the poles. I hope the next edition will contain some information about Microsoft.Net too.

A concise and comprehensive analysis of two technologies that are not necessarily mutually exclusive. Mr. Pritchard did an excellent work of dissecting each one and at the same time, achieved a perfect balance between theory and code examples that is so rare on this field. If you need to decide between COM and CORBA on your next eBusiness or back-office integration project, this book will set you on the right path.

If you're in the process of architecting a new system or planning to rearchitect an existing system, this book will prove invaluable in helping you evaluate the strengths and weaknesses of each approach. Even if you're just interested in both technologies and want to dig deeper into each, this book is a sure bet!

This book is quite thin, and yet it includes so much. The open mind towards competing technologies is important, we should all look at facts in an objective way. The book gives an excellent view on COM, CORBA and the differences between them. It also shows programming examples (not in depth) and explains things like "push" technologies very good. I would expect the first book in this subject (side-by-side approach) written by a technician, to be too detailed, with a poor language and not very educational. I was very wrong. An amazing book!

I know this book might be a bit outdated but the principles always apply. This book is not only a Networking book but one of the best books I have read on how to setup a computer business. I am a programmer and this book helped me get my business going. Matthew gives very practical, easy-to-follow examples of how to run your networking or software business.

Matthew Strebe is a professional consultant so he knows what he's talking about. Book is full of practical, detailed advice about running your own business. He tells you about taxes, incorporation, deductions,etc. Also a very good section on marketing. He tells you about his experiences with mailers, ads, etc.

Smart. To the point.

Money well spent.

Wow! I wish I would have had this book 4 years ago. A must read for anyone thinking about taking on side-jobs or going out on their own. Not only is this book packed with invaluable information but Matt's sense of humor made reading this book an absolute pleasure. Two big thumbs up from this reader! :)

Book covers the business, legal, technical ends of consulting. I feel greatly enlightened after reading it. It was recommended on the Cisco Newsgroup, and I thank the person that told us about it. After reading it, the book will now stand as a reference for me, especially the fine examples of contracts included. A real book written by a real professional, and not stuffy like technical books from experienced people can be. I have nothing bad to say about the book, but everything good. If you have any inkling to become a consultant, or need to know more to help you make the decision, read and absorb this informative how-to manual. It accomplishes what it is supposed to in a somewhat enjoyable/light touch manner, and there isn't any more to say!

I was heading out on my own in 2001 and my younger brother (also a network engineer) had a copy of this book and gave it to me. He's a fan of Strebe's writing style from other books, and although the unfortunate cover art almost turned him (and I until he explained) away, he bought it.

The book is really pretty useful. For retainers, I use a version of his retainer agreement. However, there are some things that my experience has found are different than his experience.

For example, mailing DOES work. I bet he sent a letter. You don't send just a letter. You send a letter and YOUR BUSINESS CARD. Because out of 1000 businesses, almost nobody might need you right now, but if your card ends up in 20 rolodexes or 50 rolodexes from that mailing, over the course of a year you might get ten calls from that mailing. Calls are worth the $37.00, if that's the formula. Trust me. .... I don't do it every month or even every other month but it does work, and him dismissing it out of hand because he tried it once and didn't get any calls is a little irresponsible.

Another thing is, this book is I'm sure quite true for Matthew Strebe's experience, but if you're doing this in the post-Tech-bubble world, you're going to have to expect that it's going to be harder to find the relationships and big jobs than it was during the years Strebe was gaining his experience as an independent. I'm doing okay, my business is growing SLOWLY but steadily (which is what every entrepeneur I've met and talked to since I started doing this has told me is completely normal) and if you have solid skills like Strebe and I do, you'll prevail eventually and it is worth it.

One other thing I disagreed with is that while it is true you don't want to be buddy-buddy with your customers too much, to the point that you get exploited, the reality is that non-tech type people are a lot more touchy-feely and relationship-oriented and they need to like and trust you because you are carrying the keys to their kingdom and they know it. People can say anything they want about the sales process but the reality is I walk out of a business with a deal or a relationship 100% of the time if I connected as a person with the customer, so they saw me as someone who had the experience and character to be mucking around in their stuff, and about 0% if I didn't. You can't get that by putting up a 100% wall between yourself and your customers. Getting by in this business is less about making "big scores" and more about having successful, long-term relationships where they call you and don't resent your fee because they know you're the best they're going to find. In the 90's it was about "big scores." Not any more, and remember that when you're reading this book. I wouldn't be surprised if Strebe has changed his focus a bit since then, too.

....

I find the book "Fundamentals of digital logic and microcomputer design" very useful. I am a Cal Poly student, and took a few courses from Professor Rafiquzzaman. He is an excellent professor. It seems to me that the unproffesional comments by the other Cal Poly student are motivated. He probably took Professor Rafiquzzaman's class and received a bad grade. You should go through the book yourself and make your own judgements. The topics in the book are presented in a very simplified way. It's easy to understand. The CD included in the 5th edition is very handy. I am sure once you go through the book, you will know what I mean.

The content of this is easy for user to understand, and there always an examply in the theory. The author also combine Verilog in this book, so the student can understand Digital Logic efficiently before they can start Verilog. This will help most student understand the content of both Digital Logic and Verilog.

I haven't read this book, but from the reviews it seems that this book and the author are abnormal.

Makes understanding the subject simplistic. It tells you what you need to know and tries not to confuse you with all the other garbage some Digital Logic and Microprocessor Design books have in them. I also took a couple of courses with the author and I know that this guy has had a lot of experience with what he writes. He has written training material for certain companies in the industry. I recommended another book that he also wrote, "Preparing for an Outstanding Career in Computers," because he refers to this book in his courses and usually uses the examples from this book as a supplement to the class.

The first half of this book does an excellent job of teaching the background information needed for digital design. Unfortunately, the CPU-specific sections that follow are badly out of date. The author spends altogether too much time describing the 8086 and its family of (ISA-bus-specific) support chips -- devices that are almost never used anymore. It needs to be revised to talk about current technology.

This book does for Ruby what Kernighan & Ritchie's "The C Programming Language" did for C. It provides a concise, accessible introduction to the Ruby programming language.

Starting out with a tour of Ruby, you are then taken on a deeper dive into chapters on "Structure and Execution", "Datatypes and Objects", "Expressions and Operators", and "Statements and Control Structures". Some of the real power of Ruby is revealed in chapters on "Methods, Procs, Lambdas, and Closures", "Classes and Modules", and "Reflection and Metaprogramming".

The book closes with chapters on "The Ruby Platform" and "The Ruby Environment". The chapter on the Ruby Platform is like a condensed API guide to Ruby's core library. The chapter on the Ruby Environment will help you navigate through the Ruby interpreter's command-line arguments and environment variables as well as a grab-bag of extra Ruby topics that were not covered earlier in the book.

The book is well organized and easy to read. Each chapter is peppered with code samples. If you are serious about learning Ruby, get this book! It sits on my bookshelf, next to a copy of the Pickaxe book and The Ruby Way. Bonus: each chapter of the book starts with a work of art by why the lucky stiff!

Really found this to be an excellent guide to the Ruby programming language. This is definitely not just the API rehashed in print.

The difference in the style of this book and some others, in my opinion, is the difference between a map and a travel guide. A map may show you what and where things are, and may even be useful for figuring out how to go between locations, a travel guide will often include maps plus the inside scoop on what is interesting.

This book is similar. The writing style is like having an expert sit down and explain to you the various facets of the language, how to use them, points that are notable, etc. And all of this content is within a reasonable 400 pages.

Highly recommended.

The Ruby Programming Language is my new favorite Ruby book. I personally think it is a better text than the famous "Pickaxe" book. While the Pickaxe has a great class/module reference (it's over half of the book, after all), the actual explanations of how Ruby works in The Ruby Programming Language are clearer and go into much more depth. Most importantly for me, The Ruby Programming Language covers some of the more complicated topics, such as metaprogramming, with MUCH more depth. From the Pickaxe alone I had trouble understanding how some of these Ruby features worked. But with this new book, it's much clearer.

If you want the defacto Ruby book, this is it.

I wish every book about a programming language was written like this one:

First, it is fairly compact and doesn't waste space (and your time) explaining to you what is a byte or a register, like some 800 page "volumes about everything" do. It correctly assumes that the reader is a programmer and explains the language, not the programming.

Second, it covers Ruby in depth. Read this book and you'll easily understand the most craziest Ruby code examples that could be found inside of Rails and other popular libraries. Moreover, I've found a few tricks in the book that I don't believe I saw in the wild.

And finally, author's language is very clean, free of buzzwords and needless repetitions. As always with O'Reilly books, this one is also very neatly structured and makes an excellent reference book.

Buy it.

Very, very dense reading, but very complete as well. Aspects of the language that were only glanced over (or even ignored entirely) by the "pickaxe" book are covered in great detail. The only downside is that you have to look at several of those horrible high school notebook doodles the wannabe Murakami "Why" produces whenever people convince him that he's either "clever" or "talented."

Wow. Bucknall has raised the bar on advanced Delphi books. This books coverage of Algorithms and Data Structures is suburb. This book should be required reading for all Delphi developers. No one can call themselves an expert level Delphi developer with out understanding the concepts taught in this book. Bucknall's knowledge of Algorithms and related concepts places him in a category with Knuth & Sedgewick.

This is a book that I've been waiting for for a long time (according to the acknowledgements, Julian has worked on it from April 1999 until February 2001, probably even longer). But it has been worth it, because it's an excellent book about algorithms and data structures implemented in Delphi (and Kylix) - usually version independent.

The book consists of 12 chapters. But even before the first chapter Julian takes on the question of "why a book on Delphi algorithms?" in the introduction. He explains that a number of Computer Science algorithms books are hardly practical, and the practical books are mainly for C, C++, or Java. This is a book about algorithms and data structures using Delphi (for Windows, but also Kylix for Linux), with a lot of focus on practical and useful techniques that make sense.

A great plus is that the code in the book works for every version of Delphi and Kylix (and probably also in C++Builder), and I'm fairly confident it will remain working in the next version(s) of Delphi and Kylix to come. A bonus point is the syntax high-lighting in the source code listings. A small effort for the author/publisher, but a great help for the reader who sees the source code for the first time.

This wonderful book is now again available for purchase from lulu dot com. The known errors have been fixed and its got a new smarter look and feel.

I still think of myself as being a beginning programmer, although that's not totally true, having messed around for about ten years with CAD macro's and dbase add-ons and turned them into full-blown applications that finally became fairly complex. However, I never had a decent IT training beyond some basics in Fortran and Algol, and know next to nothing about OOP.

I first thought Bucknall's book would not be for me, as I was afraid of landing into high level topics and getting lost in jargon.

On the contrary, I hardly can stop reading the book, which finally provides a very practical approach to Delphi/Kylix programming, giving light to many abstract topics you will not find in most books : the trade-off between speed and memory efficiency, how data structures and the mix you make of them in your application affect your program's speed and reliability, easy steps that make debugging and testing more efficient,...

Once you've got the hang of using the VCL within Delphi and know how to place controls on a form, you can immensely benefit from this book, that can be used as a reference into many algorithms and their Delphi implementation, or can be read chapter by chapter as an introduction to analyse the merits of several ways to sort/search/hash or use various data structures to solve a problem you face as a programmer.

Julian Bucknall's text is very understandable, even to non english native speakers, stays close to the topic while providing you with a wide scope of insights into related subjects. He's also keen on giving you all the tips he can coming from his personal practice as a programmer that make you understand why some theoretical topics matter to your program's quality. It's nearly like having him looking over your shoulder and helping you making the best choices. The book provides you with a real simple alternative to searching the web multiple times or trying to translate C coded algorithms into a Delphi equivalent, hence it will be a time saver to many Delphi user's, even a casual one like me.

This book is a must have, as a complement to a good Delphi / Pascal reference.

This book it's of essential importance for all mid-level delphi programmers. If you like to know the low-level working of common data structures of the IT software engineering (or if you like to build one), then buy hands down this book: it's the best around. Moreover the ezdsl (the author free library) is the fastest implementation that i have seen. Personally i look that ezdsl/delphi is faster than the STL equivalent under c++.

This book was required for a college course, and I must say, I'm glad it was. The book is greatly informative on all topics, and brings up relative points I had never thought of on programming. I'd highly recommend this book.

Well, I can't say much that the other reviewers haven't already said. This is a terrific text that very clearly explains how things work in computers, right down to the finest level. Hyde writes in a casual, conversation-like tone (sometimes bordering on poor grammar) that makes this text a lot more stomachable than I would have thought. Typos are minimal (I recall maybe 4 or 5).

Now that I've been through the book (after maybe 2 weeks, at an easy pace), I can't say that I'm going to go write assembly programs. I can say that I know a great deal more about how computers work, and how I can write code that works more harmoniously with computers. My background is mechanical engineering with a ridiculous dose of electrical engineering, so a lot of the concepts presented were review for me (digital circuitry, binary math, etc)...but it is always good to hear the same material again in a different way. As I said before, the casual tone makes the material easy to follow, as well as Hyde's very clear explanations. However, as a mechanical engineer my programming background was just "writing code," i.e. how to get various programs to run correctly. I read the chapter in the text on memory twice- I found that chapter alone to make the book well worth the money to me, as I am currently writing codes that demand every inch of speed and memory that the computer can offer.

So overall, its a good book, worth the money, and worth taking the time to read.

This is a great way to understand data flow at the machine level.

I especially like the part on memory and IO.

Author has explained low-level concepts lucidly. It is easy on eyes. Basic concepts become very clear. It is one of those 'can't keep down without reading few chapters at a stretch' kind of technical book. Very few books have this edge. Just don't feel like stopping reading it.

Beginners must read this book before attempting to read more in-depth low-level technical books. This book is a must for people who are exposed to high-level languages but have not studied Computer Science.

If you're like most IT people out in the workforce today, you've got pressures from all sides - deadlines, keeping current with changes in platforms, hardware, software tools, etc. Gah! It never ends!

So, you pick up these "Write Great Code" books, thinking that you'll be a better programmer.

And it's interesting in a way that you remember when you were just getting into the IT field as a student and later as an employee and maybe now as a consultant or contractor.

But, then you realize that this is like thinking about how your car's components are working while you're driving madly to work on some beltway. Only your skills as a driver can keep you from getting hit by a big semi, not the working knowledge of your V8 engine. Guys who work on their cars on the weekend, know more about them than you do, but hey, it gets you to work and back.

And so, you sigh and put the book down and concentrate on your SQL, or your VB or whatever else keeps you employed.

Why?

Because your users and your manager don't care about what goes on at the machine level. They want the deliverables NOW. The efficiency of your code is of no importance to them, though it is to you.

However, with enough discipline and some thought to what you're doing, you CAN make this book work for you, and get an edge over someone else's sloppy code and maybe even save yourself some programming time.

Because this book is for the guys who are the computer counterparts of the greasy-looking guys on the street who could tell you what's wrong with your car, even if you can't.

Captivate is a very useful elearning, simulation/demo program that lets you do a multitude of things. This book touches on many of those topics. I work for an instructional team that works with Captivate students and we find this book to be very boring. The sample files are drab and while some of the files on the CD rom in the back of the book are useful, many of the files are bit silly - such as the sound bytes - not real world enough. It does have a decent section in the front that briefly discusses script writing with accompanied files.

I don't agree with some of the author's opinions and the choice of a sans-serif font throughout the book - makes it a difficult read.

The tech support from Iconlogic has been good. I would like to do plenty of business with this company, but would like to see a better organized book that I can easily use in class.

Overall, you won't lose by buying this book. The book and student files could be a bit more interesting.

This is a very user friendly book. The ony thing that would make it better is if it were geared for Captivate 2. After going through this book, I feel that I don't need any organized teaching sessions for the skills.

"Essentials of Macromedia (now Adobe) Captivate" is the
title of the book. The promise is maintained when you buy it,
read it and follow its step by step exercises.
If I'm right, "essentials" are the things that come first and
foremost. When you are new to a jungle, a subject or an
application you want to get the essentials as fast as you can.
If the application you want to learn is Captivate, then Kevin's
book is the buddy on your side, the one with more
experience, the one that helps you with clear instructions and
useful tips.
The exercises on the CD are well written and work. They take
you step by step through the major features of Captivate.
The language is simple. Even for those, like me, that have
English as a second language.
In a matter of days you are up and running, creating your own
multimedia instructional materials.
Then you'll probably need other books, because Kevin's
Essentials has brought you, fast and safe, to the point you
can take another leap forward, to reach Station "Advanced".
Last but not least, Kevin Siegel is a "real person" that stands
behind his product. Like other reviewers before me, I wrote
him an Email and he answered promptly.

I really think this is the best software tutorial I have ever used, and I have used quite a few in my trillion-year career as a technical writer. It has just the right level of detail. So many tutorial writers leave major concepts and steps out because they assume that you know what they know. And you don't, that's why you bought their stupid book. But this one guides you gently through all you need to know to get firmly established in using Captivate. It was a great help to me when I suddently found a Captivate project on my desk and didn't know exactly where to start. Essentials of Macromedia Captivate helped me start at the appropriate beginning point. It also provided lots of handy tips that I'm sure helped save me a ton of time that I would have spent if I had tried to figure out the software by myself. I would reiterate, as others have here, that you need to follow all the steps in the book to get the most out of it. But doing so is well worth your while.

This book is the cheapest class you may ever have, and it is a good class. As you may have noticed there are not many books written on Captivate. It's a shame because Adobe's Captivate really is great program.

I am a freelance web designer and Flash animator in the Seattle market. Last year I wanted to learn Captivate and realized there are no classes in the Puget Sound area and only 3 books on the market.

I purchased this one and it taught me the program just working on the exercises at night. The book has not typos, a nice flow and they cover most of the program. It is a productive book and you see results quickly. Since then I have added E-learning to my list of skills I offer thanks to this book and the Adobe's Captivate.

I do admit I also purchase the Visual Quick Start book. But when I need to reference something I go to Essentials first. I will look at the example in the exercise I did and it will click right away, "Oh that's how I did it".