Computers Books

This book pulls together a number of sources from across the globe and gives an in depth explanations of a number of wireless architectures. It not only explaines key featuers of those architectures but also provides case studies which put them into context. Great for the budding and the experienced architect!

I was drawn to this book because I figured a big outfit like Cap Gemini Ernst & Young must have learned a lot, probably the hard way, showing clients how to build a wireless infrastructure that turns profits. And it turns out that's just what I found here. There are lots of examples in this book, ones from the best consultants in the world, that I can use with my own clients.

What I most liked about this book was the approach they used to provide business justification for technological decisions. It provides the approach necessary to avoid purchasing the wrong technology for the wrong reasons, ie: purchase it because it was featured in the latest tech magazine as the coolest technology when it really is a poor fit to our requirements.

This is a good read and a must buy.

An excellent collection of solid practical content, a book that can be chosen as an academic course to be taught in variety of engineering disciplines such as electronics, computer science, Internet Technologies, etc. because of its solid practical approaches to deliver solution as opposed to hypothesizing on untested value propositions.
In the era when many people rush to write books on any new technical catch phrase for the mere gratification of having authored a technical book that may augment their professional aspiration, the authors of "Wireless Enterprise Application Architecture" have provided the reader with a reference book that is a valuable knowledge source. Relatively small font size and condensed and to the point graphics that enhance readers understanding of major points discussed in the 630 pages of text are all indication of authors being the true subject matter specialists.
The views presented in the book are both from 35000 feet and at the landing level suitable for enterprise strategists as well as technical and tactical workforce.

I was doing research for our company's wireless project and came across this book. The chapters on wireless in the supply chain were excellent and highly relevant to my project. I wish I had known about them before I presented my findings to my colleagues. Either way, the book will serve as an excellent reference for my project.

Although I haven't had to use this manual yet; as I haven't been out of Cisco school for very long; I'm sure it will be VERY handy down the road after I have forgot half of my command line parameters! Seems to be just as advertised, and it is a handy size to fit in my laptop carrier.

Great book to have. Small so it fits in my lap top carrier. Cisco has so many commands and when you don't use all of them everyday, sometimes it's hard to remember. Also if you are a CCNA student, this is great for CCNA-2 when you start working in the lab. You can find any command in this book that you need.

Great product, either for real life or to study for the CCNA. I do wish they made a version w/ spiral binding.

Must have handy quide and reference for those commands not used everyday and a refreasher on those you forgot! Maps perfectly the Cisco's CCNA network academey classes (CCNA 1,2,3, & $). I'd also recommend the "CCNA Portable Command Guide" too.

Chris

If you are going through the Cisco Academny you will thank you're self for buying this book. Everyone who see this book, rushes out and buys it. It is well worth the money.

This is an excellent book on debugging. Whether you're debugging mechanical systems, electrical circuits, or software, the methodology presented is extremely practical and systematic. The author presents nine debugging rules that can be applied to any problem. The text is well-written, engaging, and humorous. The author also included a wealth of war stories that are worth the price alone. Highly recommended.

This Book Demonstrates How you could debug SOMETHING systematically, from most important principle to least important principle.(All 9 As the Book name said.) The Examples covers software, hardware, electrical, mechanical debugging. It is just amusement to read the example. HIGHLY RECOMMENDED.

Quite liked it. I now have a game plan for approaching bugs in a nonrandom manner (including intermittent bugs):


Understand the System
- Read all related documentation
- Draw a system diagram and understand how things are connected
- Know the capabilities of your debugging tools


Make It Fail
- Start from a clean initial state
- Consider automating lengthy steps
- Make it fail in situ; don't waste time simulating the environment
- For intermittent bugs: list possible factors and try varying them one at a time; output a logfile and look for patterns


Quit Thinking and Look
- Watch it fail
- Use Remote Desktop / VNC
- Add logging and monitors
- Don't start thinking until you've limited the number of possible causes


Divide and Conquer
- Binary search
- Use test data with an easily identifiable pattern
- Start at the failure point and work backwards
- If you discover other bugs that may be related, fix them before continuing your search


Change One Thing at a Time
- Don't panic
- Back out changes that have no effect
- Compare the logfile with that of a good system
- Check earlier versions


Keep an Audit Trail
- Keep a detailed written log


Check the Plug
- D'oh!
- Have the components been properly initialized?


Get a Fresh View
- Try explaining the problem to someone (or something)
- Ask an expert: co-workers, the vendor, documentation, bug database, the web
- Report symptoms (including possibly unrelated observations), but not your theories


If You Didn't Fix It, It Ain't Fixed
- Fix the root cause
- Make the problem happen again by undoing your fix

I worked with Dave Agans for over 10 years and I can tell you first hand the man knows what he's talking about. From developing hand-held controllers in the late eighties to single-board OS/2-based videoconferencing products to software collaboration tools, we have debugged problems of every ilk. Whether the problem was an FPGA bug, a faulty component in a board, a race condition in a device driver or a dangling pointer in a DLL, Dave always approached the problem with his same set of debugging rules, and they never let him down. Read this book. It's engaging and fun to read. But more importantly it will make you a better debugger, whether you're debugging hardware, software or your lawnmower.

This book is absolutely indispensable for anyone working in any job where things occasionally work in an unexpected manner. It's concise, funny, well-written, and full of immensely useful tips on how to go about debugging problems.

One of the great things about this book is that it's generalistic in nature, not specific. Agans's decades of troubleshooting experience has given him great insight on how to go about debugging in all sorts of environments, so he lays out nine rules for approaching any problem:

Understand the System
Make it Fail
Quit Thinking and Look
Divide and Conquer
Change One Thing at a Time
Keep an Audit Trail
Check the Plug
Get a Fresh View
If You Didn't Fix It, It Ain't Fixed

[...]

Debugging isn't an art performed only by folks with some odd genetic disposition, it's a critical craft which can and must be learned. I was fortunate to have some good troubleshooters as mentors during my days working radar inflight in the Air Force, but I've fallen out of many of the good practices those folks beat^H^H^H^Hinstilled in me. Agans's book is helping me pull out of the thrash and churn mode of debugging.

This book's only 175 or so pages long and is well-worth adding to your library. Actually, substitute "a critical addition" for "well worth adding". I'm also going to make sure this book gets added to the professional development reading list I'm working on creating.

Great book for reference and self study if you remember your circuit analysis and laplace transforms. Very detailed with out making ones eyes gloss over. Do wish it had a few more d examples but overall cant complain.

Mulling through some old reviews, I noticed that I left a technical error (more of a technical glossing-over) in my review of Franco's opus. It's high time I corrected it, since it's been there for more than a year, no doubt befuddling readers who thought they knew something about analog electronics. Specifically, I had said that the designation of the input terminals as '+' and '-' really made no difference: it's more reflective of convention, sciz. (assuming something other than a difference amplifier), the significant input network is attached to '-'--with '+' grounded--if the configuration is inverting, but to '+' (with '-' grounded) if the configuration is non-inverting. That's the truth, but it isn't the whole truth. When we examine border cases--those that tax the operational limits of the device, straying outside the "passband," analogically speaking (yes, I know, that typically refers to a frequency range, but here I use it to address an input voltage difference range)--the otherwise cosmetic or mnemonic choice of '+' or '-' terminal becomes rather more manifest. Remember that the amplifier actually amplifies the input voltage difference in the microscopic sense--even though it implements a semantically notable linear operation in the macroscopic sense--relying upon the feedback network to remanufacture an appropriate input voltage difference that maintains the nominal purpose of the circuit. When things go ape and the input voltage difference is much too high or, alternatively, much too low (and that may be a tough nut to crack), the output characteristic will be dependent upon what was connected to '+' and what, to '-'.

Now, wasn't that as clear as mud? Remember, I'm constrained to use words, and words alone, as my medium of communication, and, since I have only a fraction of a thousand words, I have only a fraction of a picture!

This book can be an excellent resource for any Analog Integrated Circuit Design Electrical Engineering student or practicing engineer. The book can assist in the modeling of IC devices such as transistors, resistors, and capacitors. It also sensibly covers the building blocks of analog integrated circuits: gain stages, output stages, level shifters, current sources and mirrors.

The reader is expected to have a general understanding of electronics, frequency-domain analysis procedures, and understand basic Pspice operations. The book generally covers enough material for a half-year of courses at the upper-division/graduate level although the book could certainly be useful for a single class.

The material generally starts out as basic and proceeds to a complex level. There are helpful figures and diagrams on nearly every page and the organization is generally sensible and intuitive. There are many worked examples and hundreds of end-of-chapter problems. The text is supported by a website that offers downloadable design projects, additional examples, and design software. Franco has done an admiral job at presenting a complicated subject.

Here's a brief description of SOME of the topics found in each chapter:

1) Basic amplifier concepts and arrangements are explored. Also covers negative feedback, the loop gain, and basic circuit analysis.

2) Current-to-Voltage & Voltage-to-Current Converters, Current, Difference, Instrumentation, and Transducer Bridge Amplifiers.

3) Active Filters. Transfer Function, 1st order, KRC, multiple-feedback, state-variable, audio, and biquad filters.

4) Filter Approximations, switched-capacitor, universal sc filters, and cascade design.

5) Low-input bias-current Op amps, low-input-offset-voltage Op Amps, Op Amp Circuit Diagrams, and Input offset Voltage.

6) Open and Closed loop response. Transient Response, Input and Output Impedances, and effect of Finite GBP on Filters and Integrator Circuits.

7) Noise Dynamics and Properties. Sources of Noise and Low-Noise Op Amps.

8) Stability problems. Stability of CFA Circuits and in Constant-GBP Op Amp Circuits. Internal and External Frequency Compensation.

9) Schmitt Triggers, analog switches, voltage comparators, and precision rectifiers.

10) Sine, Triangular, Sawtooth, and Monolithic Wave Generators. Also Multivibrators and V-F and F-V Converters.

11) Voltage References and Regulators. Switching, linear, and monolithic switching regulators.

12) Performance Specifications, D-A and A-D Conversion Techniques. Oversampling Converters and Multiplying DAC Applications.

13) Nonlinear Amplifiers. Phase-Locked Loops, Monolithic PLLs, Analog Multipliers. Log/Antilog and Operational Transconductance Amplifiers.

This is an excellent book on linear circuit design, the best I have read to-date. It covers feedback theory, ideal op amps, active filter design & most importantly practical op amp limitations. It also covers voltage regulators, voltage references, ADCs, DACs, op amp noise & more. What I liked most was the combination of mathematical circuit analysis & practical design. Too many books show useful circuits without bothering to explain anything about how they work. It also has plenty of exercises to tax the brain.

Really a top notch book on op-amps and almost anything you'd ever do with them. Has math where it's needed and rules of thumb where it isn't. Actually is just a great analog design book altogether. Really the definative text on the subject of designing with op-amps.

This is a good book, that covers a lot of info. It also holds up as a book, and not just a how-to. All the info in this book is good info, but it is better suited for large markets. Don't expect to be able to read this book and be able run a business right of the gates, but at the same time this will help get you on the right track. Get this book, it is a good look into how someone got into the business and was able to make it work for a long time.

A great book that gives you the important information you need to run your own production company! I don't know of another title that actually tells you how to get the work that will support your financial needs. After all, you have to have work coming in the door or else...

I am an instructor at advanced multimedia classes at a Business School close to Copenhagen, Denmark. I've been around for a while and have been working with 3D, animation, database programing and webdesign and I have also read parts of this book with great excitement and can't wait to finish it. This is a book that has been a demand for on the Danish market for several years...and now it is here. Wonderful. I particularly like the very direct and bold way it describes how the future entrepreneurs should behave on the market in order to survive. Conclusion: the absolute BEST step-by-step book ever written on the topic and a must for anyone going into the media business.

As a reader just finishing the final pages of 'Desktop Video Studio Bible', I must say I totally enjoyed it. This is an excellent guideline to starting and maintaining a business. I'll keep this as a reference for years.

My wife and I have recently started a media production business on the side as presently we both work for a large computer company. I have been in the engineering related field for over 20 years. We got started in this media business at home doing simple home movies and transferring video tape. Slowly the word spread at work and among friends and before too long we saw a nucleus for a potential business. This spring we presented a surprise 40th birthday video produced by our company at a party hosting about 80 people. It was a great success and was a rush and now we are hooked. Maybe this was a peripheral effect of the "Really Big Thing"? Read this book to find out about the "Really Big Thing".

Even though I have over 16 years experience in the video industry, this book has given me the tools, advice and motivation that I'll need to finally realize my dream of owning my own media creation business.

Not only is the book extremely informative, it has a very readable and enjoyable writing style that made me feel as if the author were speaking directly to me. If you have even the slightest interest in getting involved in digital video production and/or web production, you need this book!

For anyone who wants to know the history behind the personal computer revolution, this book is a must read. The author was a senior writer for Science magazine and understands both the technology and the people involved. There's almost no fluff in the book's 475-pages of fact-rich, well-written prose. My only complain it that, along with pictures of people, I'd have loved to have seen pictures and diagrams of the early equipment he describes.

--Michael W. Perry, author of Untangling Tolkien: A Chronology and Commentary for The Lord of the Rings

If there such a thing as an "epic" story of computer science, then M. Mitchell Waldrop's The Dream Machine is it. Although it purports to be the story of J.C.R. Licklider, and the birth of personal computing, this book is much more than that. It takes us from the edges of the computer science revolution, through the development of the modern computing industry and the World Wide Web.

Waldrop spends more time exploring the shadowy edges of the rise of computer science in America, and the intellectuals whose raw thinking provided the structure around which computing would develop. Giants like Norbert Weiner and Claude Shannon, and more obscure players like John Atanasoff of Iowa State University are given more thoughtful attention here than in most popular history accounts that I've encountered. Not only are their concrete accomplishments covered with clarity and understandability, but the thinking that got them there is attended to as well.

Of course, among the cast of great individuals is Licklider, whose efforts are worthy of the title billing Waldrop gives him. J.C.R. Licklider was a computer scientist before there was computer science, in any practical sense. While Lick (as everyone called him) himself, and the voice of technical accuracy, would likely disagree with that assertion, I stand beside it. Licklider was first a scientist, and he applied those core principles to developing his ideas in computing; computer science.

However, Waldrop's book does not feel like it was about Licklider, per se - despite a very intimate coverage of the man. Instead, the book remains focused on the growth of the intellectual concepts, and the practical technology that rose from those ideas. The scope of characters and technical detail covered by the book is remarkable, and yet it remains a readable and compelling story. The science is clear and understandable to individuals with an interest in the subject, without requiring a deep background (although, those with deeper backgrounds will still find the book enjoyable, and original).

If The Dream Machine were a novel, you might conclude the author used every writer's technique to make it a thriller. Even though you know the outcome, you wonder how the many "miracles" and lucky breaks it took for the dream to become reality.

A graduate course in a book! A tour through historical theories, accounts, and events that made up the development of the modern computer and the Net. Far more extensive than just the story of Kicklider, a historical overview of many of the minds at that time and the events that converged to form the new informaton era.

Many books and documentaries have been produced chronicling the emergence of the mouse, windows and the internet. Most focus on familiar personalities: Gates, Wozniak, Jobs, and that crowd. But, that's too simplistic; they're merely the contemporary pioneers of the modern computer age. All of these invetions were propelled by visionaries of an earlier age, and J.C.R. Lickleider was one them. If you're interested in the history of emergent technology, you'll be fascinated by this alternate tale of the computer revolution in which one man became the focal point of technological change. His name is not a familiar one to most, yet without his ability to get university (and later government) financing for what seemed like zany ideas at the time, we might not have seen the development of ARPAnet, the progenitor of the modern internet. Though Lickleider himself probably never had a complete vision of what was to come from his efforts, there can be little doubt that his role was pivotal.

Author Waldrop takes you through Lickleider's life in academia where he struggled to push his vision of "computing for everyone" in which computers really would be used by the common person, not just by the military or major corporations -- a vision which was understandably rejected by most of his peers when computers were still the size of living rooms and cost as much as the GDP of small nations. Readers who are familiar with James Burke's "Connections" series will see a similar pattern to this story in which one person was at the right place at the right time to gather disperate technological threads together. Lickleider was not responsible for tying the final knot of these threads together, but without his influence, it might have taken a lot longer.

I am so thankful for the insightfulness of Mr. Aronson. I have done more conceptual video work in the past when I was a graduate student in photography. I am looking a doing another educational project and wanted to brush up on my skills. The book provides me with the knowledge I can use to feel much more confident in the upcoming project as well as exploring my own fine art projects. I highly recommend this book for anyone interested in digital video.

este es un libro que explica de manera didáctica ,todos los procesos que tiene una producción audiovisual.
Muy bien ilustrado, con ejemplos que ayudan al nuevo realizador audiovisual a enfrentar sus primeras producciones de una forma segura, buscando que éste no cometa errores que luego pueden demeritar su trabajo.
La única crítica que tengo para hacer de esta obra, es que los ejemplos de montaje los realizan en programa específicos , como Final Cut, algo que de alguna manera deja sin posibilidades a aquellos que manejamos plataformas de edición diferentes.

"DV Filmaking from Start to Finish" is a !!MASTERPIECE!!. It is a book I
recommend to anyone interested in Digital Video. Reading the book was like having Mr. Ian David Aronson in your room sharing with you all of his knowledge.

This book it's not a 18 chapter tutorial on learning Final Cut Pro or After Effects. It's more like traveling back in time and learning from the history of Digital Video to the present day. Aronson show's everything, from film to video, the way you should treat your camera, what you should be
prepared with; lighting, greenscreen, Hardware, white balance, DVD
authoring,
aspect ratios, you name it, including some basic tutorials on doing
edits.
He even gives you an internet address to look and confirm what he is showing
you.

If you are an advanced editor, this book is for you. This book is for to
read,
learn and keep it forever just in case you forget a detail, so you can
review it again and again. I was amazed with the things I have learned from
Mr.
Aronson. Thank you and I'll hope to read another book from him.

Jorge Raphael Valenzuela Hernández
Graphic Artist / Videographer

DV Filmmaking From Start To Finish by Ian David Aronson's will reach both amateur and professional digital video users with a basic primer on differences between digital and print mediums. Familiarity with Final Cut Pro or Adobe After Effects, the two programs used here, will aid in understanding DV applications in either PC or Mac formats, while the author's background as a teacher of digital media lends a logical progression to his tips and practical applied examples.

DV Filmmaking for Ian David Aronson gives you in 18 chapter a coverage for the production, post-production and distribution process of the digital film making.
The book starts with basic digital Cinematography principles. It covers he process stages such as composing shoots, lighting, shooting, working with cameras, audio, still images and titles.
This book doesn't give you a specific software tutorial, but if you are working learning with video production and video editing program, you should get a background about the whole film making process. However, this book gives you a strong background in this industry. I find this book useful for animators, multimedia designers and creative directors.

The two appendixes in the end of the book gives you a tips about getting your work in various media and selling your products.

This book is very suitable for readers who already have some programming experience on other languages. It positions right there between beginner level and advanced topics. It also makes perfect balance between tutorial and reference book. It is one of the best C# books that I have read so far.

Good balance between a reference book and one to learn from. I agree with most of the other reviews. The organization is great and progressive.

Overall this is a very good book for both beginners and advanced C# programmers. I would like to rate it 5-stars, however, I found the examples with some errors. The editing team should put more effort on reviewing the examples. Eventhough, I still recommend this book.

Hi Everyone;

I've read many C# books and I love this book. Mark's approach and ease of communicating a point, is great. There are many people who are very knowledgable, but have no skill of teaching a subject. As if they have closed their ears and kept talking.
I actually look forward to reading the next page/chapter, rather than see if I'm done.

Highly recommended!
..Ben

Even if I rated 5 out of 5, the book contains a lot of *very serious mistakes* in the code samples (I have found out more than 10). I'd like to think they are typo mistakes, and the code does not contain what the author intended to write. A very bad rate for the reviewers, who either do not know C#, or they did not review the code samples at all.

I have witnessed the proliferation of data networks over last fifteen years during which time
network security has grown to multi-million dollar business. I have taught and consulted on
design and implementation of network security.In today's corporate and SOHO network, secuirty
is extremely critical to protect and safeguard data. Firewall technology provides a defense
mechanism against unautorized access to data networks. This textbook provides a comprehensive
treatment of firewall from introduction to management and advanced configuration. The appendix
has a list of current firewall vendors that should be of extreme helpful to any reader. I would
highly recommend this text to anyone before they decide to purchase firewall to secure their network.

This book covers firewall implementation, configuration and maintenance with excellent references and examples. John Vacca starts with installation and setup and then moves into implementing and maintance. Along the way many real life experiences are used as examples. Before you start or before you do any updateing on your firewall be sure to read this book.

Having worked in the computer network/security field for the last 16 years, I found this book to contain most everything you need to have a working knowledge of firewalls. I would highly recommend this book to anyone that needs to come up to speed quickly and/or needs a refresher course. I find myself now to be in the later category but I wished this book had been written when I was first starting out as it would have saved me a ton of time.

I highly recommend "Firewalls" by John Vacca. I found the book to be extremely helpfully in understanding the configuration and maintenance of firewalls as well as a great reference for the different types of security infrastructures that can be implemented using the technologies available today. "Firewalls" is an excellent knowledge base that I would recommend as a must read for anyone in the computer security and system administration fields.

I fell into the category of "I know what a router is but I hope I never have to set one up." Our routers were handled by another talented memeber of our team. When she left, I gave it shot using some manuals we had from cisco and some other informatin passed down from project to project. Completely lost, I decided to start from the beginning. This text was just the ticket to get me started!

Target Audience
Java developers who want to learn how to use the Eclipse IDE or how to develop enhancements for the Eclipse framework.

Contents
This book is a comprehensive coverage of the Eclipse framework, both from the perspective of using the tool and writing extensions to Eclipse.

The book is divided into 3 parts:

Part 1 - Running Eclipse - Getting Started; Using Eclipse; Using Java Development Tools; Debugging Java; Teaming Up With Eclipse; Eclipse Configuration Management

Part 2 - Extending Eclipse - Overview Of The Eclipse Architecture; Getting Started: Plug-in Development; Action Contributions: The Integration Fast Track; The Standard Widget Toolkit: A Lean, Mean Widget Machine; Dialogs And Wizards; Views; Editors; Perspectives; Workspace Resource Programming; Managing Resources With Natures And Builders; Resource Tagging Using Markers; Contributions Revisited; Advanced Plug-in Development; Creating New Extension Points: How Others Can Extend Your Plug-ins; Serviceability; Developing Features; Providing Help; OLE and ActiveX Interoperability; Swing Interoperability; Extending The Java Development Tools; Building A Custom Text Editor With JFace Text

Part 3 - Exercises - Using Eclipse; Using The Java Development Tools; Debugging Java; Using CVS With Eclipse; Modifying Your Configuration With Update Manager; Using The Plug-in Development Environment; Feature Development And Deployment

Review
As an IBM software developer using Domino and Notes, I'm hearing more and more about WebSphere Studio Application Developer. That's the IBM WebSphere Integrated Development Environment (IDE) that is built upon the Eclipse framework. But just what is Eclipse, and why is it so important to you as a developer? This book will help you answer those questions.

The book serves two purposes. Part 1 of the book will allow you, as a Java developer, to understand how to use the tool to code and test your programs. They also devote coverage to how CVS, the open source version control tool. Even if you're not interested in extending the Eclipse tool for your own use, this first part of the book would be worth the purchase.

Part 2 gets into how the Eclipse framework can be used to write your own tools to integrate into the environment. Granted, this part of the book won't necessarily appeal to everyone, as some of you will only want to use the core functionality of Eclipse as an IDE. But you can think of this section as a lesson on the internal architecture of Eclipse. The more you understand about the tool, the more effective you can be with it.

And finally, you have the third part of the book that consists of a number of exercises to bridge the gap from theoretical to practical. Taken as a whole, working through this entire book will give you a solid foundation in Eclipse.

And for Notes/Domino professionals... I think a case could be made that you should seriously consider buying this book to prepare for your future. ND8 is projected to be a rich client built on this platform. By reading up on it now, you'll be prepared for what's coming. And if you're a business partner who builds tools for the Notes/Domino client, you'll need this information to start to figure out how you can transition your business in the future. Don't let it sneak up on you.

Conclusion
If you're thinking about diving into the Eclipse world, get this book. And if you're already an Eclipse user but want to make changes to your environment, this book will give you the information you need to start down that path.

Learning Eclipse, the open-source IDE and tool platform, can be a
daunting task. While a plethora of on-line resources exist for
learning.... knowing where to start, and
remembering what you've read, can be challenging. Finally a book
with much of this in one place: The Java Developer's Guide to Eclipse.

As a long-time lover of books, expecially Java books, I find that
learning from online resources on the web can be sufficient, but
often it's hard to know what you've read, where you stopped, where to
find something, etc. Especially when you're learning something very
new, or very complex, having it all in your hands can be comforting.
(And you don't have to close the book during takeoff and landing.)

Written by Eclipse experts with experience using *and teaching* other
developers in its use, the chapters and exercises are well thought
out. The authors are instructors with experience in teaching Eclipse
to software developers, so have a good knowledge of Eclipse and how
to present and explain it.

This book contains three parts: Using Eclipse as an IDE for
Java developement, Extending Eclipse with plug-ins, and exercises
for all of the above. While a few other books are available on using
Eclipse as an IDE, this is by far the most comprehensive
book on extending it by developing plug-ins.

This book is unique in its thorough coverage of plug-ins (extending
Eclipse: want a new popup menu? code reformatter? Write it yourself!)
but don't overlook its good introduction to using the
Eclipse IDE itself for developing Java code, as well as a great
chapter on using CVS and the Eclipse interface to CVS
code respository that is part of the standard download.

The exercises on using Eclipse and building plug-ins are great, and often walking through the exercise
(resources included on the CD with the book) reinforces or sheds
additional light on what is covered in a chapter. At times
I jumped directly to the exercise after only briefly reading
the associated chapter information, and the hands-on learning
accomplished in this manner was great for this impatient Java
developer.

I took the IBM class with the same name as the book, and found
the exercises in the book similar, if less extensive than, those
included with the course. But the basics are there, including
the exercise that introduces action sets etc. that I referred
to several times in my first plug-in development. A lot of my
code started with the exercise code and grew from there. As I worked
through subsequent chapters and exercises, I came to a clearer
understanding of what had been done in the previous code imported
in the exercises, yet I was already up and running in terms of
developing my plug-in.

The book is written to Eclipse 2.0, with a few comments regarding
changes for version 2.1. While it would be nice to have the minor
2.1 changes reflected in the book, I know the authors had to stop
somewhere to get published. This was the first Eclipse book
published, I understand.

Excellent, and highly recommended for all Java developers wanting
to use Eclipse, and especially for those wanting to develop
plug-ins for extending Eclipse to their own applications.

This helpful and extremely well-written book is really many books in one. The Java Developer's Guide to Eclipse provides a coherent, organized, and well-written reference for using the Eclipse platform and developing plugins. In addition to the basics, the book covers such advanced topics as Eclipse Configuration Management and Providing Help. One section of the book provides a comprehensive set of exercises that enable you to get hands-on experience working with Eclipse.

The book is organized into three sections, each geared towards a different level of experience with Eclipse. While you may make use of all three sections, the organization of the book helps you to quickly find and focus on the material that you need.

The information provided with Eclipse and the Web sites that support it is considerable. The great aspect of this book is that it offers so much usable content in one convenient source, while providing additional information to supplement the online help already provided with Eclipse.

I was initially disappointed that this book did not cover JUnit and that it was based on Eclipse 2.0; however those issues aside this book is a great resource on Eclipse written by folks on the development team. I am using Eclipse 2.1.1 and there are some differences for some things, but most are minor. The book is divided into three parts with Part Two having two sections. Part One focuses on the Eclipse development environment. In this section, there some very good tips about using Eclipse. I particularly liked the chapter on using CVS with Eclipse. There was some practical advice given about how to deal with issues one would encounter in projects while using Eclipse and CVS.

In chapter one, the authors challenge Eclipse veterans to read it with "bet you didn't know how to ...". There are some great keyboard shortcuts and other features of Eclipse that surprised me. There is a blind programmer on our staff that will get great mileage out the keyboard shortcuts.

Part Two is about creating plug-ins for Eclipse. At first, I was moderately interested in some plug-ins, but after digging into this section, I already have a couple of plug-in ideas that I want to pursue. The authors make it seems like a very natural thing to do. Part Three is composed of exercises on using Eclipse for Java development, with CVS, for debugging, for updating your Eclipse, for Plug-in Development Environment (PDE), and for feature development. The exercises are step-by-step instructions relating to certain chapters in the previous parts. Read the chapters first, but do these exercises!

If you are using Eclipse for development, this book has a wealth of information from those in the know. After all, WSAD is basically a bunch of Eclipse plug-ins.

Back in 80's when unix network programming was a black art, Stevens book on Unix Network Programming showed the way to common programmers about how to write something magical in unix/c/sockets. I can only compare this book with the same spirit.

By reading the book and practicing the exercises in the accompanying CD, it is almost guaranteed someone will not only become a good java programmer but it will also help to extend and share the knowledge of creating tools. Writing good code in java is not simple. This book clearly explains what is really needed from a user perspective to become a good programmer and team-oriented productive resource using eclipse.

The first part explains what a freely available Eclipse can do for you. This is the most comprehensive introduction I have seen so far. It will teach you the smartest way to deal with java projects from a life cycle perspective - create, test, debug and maintain. Each chapter is clear and concise. Tips and tricks are every where.

The second part explain that extending and customizing eclipse is no rocket science. It is hard in a way but definitely manageable even for a starter. Referencing eclipse api is a must while reading this part. I wish some concise reference (like O'Reilly's "...nutshell" book style) would have helped the programmer a lot.

The third part is a gem. Added to the explanation of materials of each chapter, it went far beyond. Just by practicing the examples will take the user to a commanding position. This part also makes the book a handy desk reference on using eclipse tools. I'd also recommend the reader to take a look at the eclipse.org site to check the plug-ins. A lot of them are very useful and free too.

Overall, this book is excellent. In my opinion, this book is one of the major contributors to the community in the increasing the popularity of using eclispe tools, customizing and enhancing it.