Data Books

A very good reference guide for any new/existing cme/cue deployment. Specifically the sample config guides were very useful. Overall this book is well written.

Cisco IP Communications Express: CallManager Express with Cisco Unity Express (ISBN 1-58705-180-X) is an all-in-one resource for configuring, managing, and troubleshooting the Cisco CallManager Express (CME) solution. It is almost 900 pages and is well organized into five parts: overview, feature operation and applications, administration and management, maintenance and troubleshooting, and appendices. If you are involved in configuring or maintaining the Cisco CallManger Express, this book will provide you with all the information you need to get your work done.

Cisco CME is an integrated solution offered by Cisco for meeting the IP telephony needs of small businesses or branch offices. The CME solution, which consists of the call processing feature and the voice mail feature, runs on the Cisco routers ranging from the 1700 series to the 3700 series and beyond. Whereas the CallManager suite offers centralized approach to building out an enterprise wide VoIP network, the CME is meant to serve the needs of smaller businesses or to integrate seamlessly into the larger, enterprise solution.

The book is well written and starts out with a high level architecture of the deployment scenarios for CME. The second part gets into the features and applications side of the solution. This part is where the crux of the book lies. It presents a detailed coverage of the commands used to configure the CallManager solution under various scenarios such as implementing different call features, integrating VoIP with PSTN, and deploying CME as part of a larger CallManager solution. This part presents a thorough coverage of Unity Express (UE), the voicemail module of the CME. The third part relates to the management of CME. Particularly useful in this part is a real-life configuration example as it illustrates and brings together a lot of the material covered in the earlier part of the book. Part four gets into the essential topic of troubleshooting the CME solution. It provides useful tips and solutions for common problems found in deploying the call processing and voice mail aspects of CME. This is definitely a very useful section of the book. The last part, the appendices, has reference materials and scripts used in the book to make daily tasks easier etc.

One of the strong points of the book is a multitude of sample configurations. The authors provide sample configurations throughout the book to help illustrate the concepts being presented. This sample configuration goes a long way if the reader has the task of actually configuring CME. The other strong point of the book is the depth of coverage given to each topic that is discussed. With the exception of a handful of topics (one in particular which I'll mention), the book never glosses over any topic; rather it covers it in detail, ensuring that most aspects of the topic are addressed. The exception to this was the coverage of the D/A module(s) used for attaching analog devices to CME, such as a fax machine. Given that analog fax machines still constitute a critical part of any business, I would expect this topic to be covered in detail. However, I found that no configuration examples were provided on how to configure this in the CME suite.

In summary, this book is a great all-in-one reference for configuring and managing CME. I would highly recommend it to any professional tasked with working on Cisco's CallManager Express.

overall this book is very good. I like the examples it presents to make thing clear, and also the broadness of topics it covers.
Since Cisco IP Telephony evolves so quickly, I wish Cisco will release newer editions with updated technologies. in particular I was hoping this book should contribute some to SIP and its deployment in UCME environment.

I've used this book as a main reference for my first complete implementation of CCME and CUE. I said "main" reference instead of "only" reference, because there are few small gaps to be filled by Cisco on-line documentation, but the deficiencies are too small to justify anything less than 5 stars. Additionally, there is a lot of general (IP and traditional) telephony information so even a relative beginner, after reading this book, will be able to intelligently interview future users (Chapter 5 is simply brilliant!), design quite complex system with many fancy call features, and even create scripts for quite sophisticated Auto-Attendant options. Certain concepts are not explained in complete detail (for example dial peers or voice ports), but deeply enough for the needs of CCME.

A must have book


This book is a great tool for full and complete understanding of Cisco's IP Communication Express. The structure is geared to first provide a foundation with an overview, then moves into design and implementation the book is organized into different parts that provide great coverage of all aspects.

Part I starts with introducing IP Communication. The coverage begins by taking you on a journey into what Cisco IPC is, the benefits of IPC, and the architecture of IPC networks. The one thing you notice is that the authors took great care in organizing the chapters. Each chapter is well written and easy to follow along. This makes the book a great choice as either a first learning book or as a refresher book for experienced professionals looking to augment their knowledge. One of the first chapters shows you the features and functions of the various gateways, WAN interfaces and IP phones available for use in an IPC network. This allows you to pick the best equipment for your particular solution. I believe this is great because it allows you learn some features of the product in order to decide if you would like to research it further; this helps streamline the process of design and political issues. Another section of the Part 1 goes over the architecture of IPC. You will learn the ins and outs of what happens at a low level. You will learn a-lot of core information; get an introduction to equipment and technologies that can be utilized.


Part II of this book is where the fun begins. Chapter 4 goes over the IP phones in more detail. You are taught about features and how to configure the individual phones. The chapter is short and to the point. Chapter 5 is an incredible book where the engineers' ears will perk up. Call Manager Call processing features are presented in this chapter. The topics here include hunt groups, call parking, shared lines, intercom, paging and much more. I really like the configurations and examples in this book. With this chapter you will be able to quickly implement the CM features.
The next chapter deals with Connectivity to the PSTN. The focuses in this chapter are signaling and how to handle the inputted digits. One of the only faults I think with this book is that chapters 5 and 6 should be swapped.

Part III and IV cover Administration, Management, Maintenance and Troubleshooting
Now is really where the techies cheer up. Here is all the goodies on how to setup CME, UE, and what to do if problems arise. The gold mine is located in these 2 parts.
These chapters provide the reader with detail and examples to help reinforce all that is being explained.

I don't want to spoil this book or be long winded so I will say the remaining pages of this book are well worth the read. It covers everything you need in order to obtain a solid understanding of Cisco's IPC. There is no area that isn't covered with attention to detail. The authors provide quality information that is very useful in all areas of understanding and implementation of Cisco IP Express. The reader will come away with exceptional and relevant knowledge to do anything needed with IPC. I got this book to help augment my 4+ years with Cisco Voice products, I feel that it did help cement my knowledge and also taught me quite a few new things.


Brion S. Washington

I am only a third of the way through the book and it has been very informative and easy to understand. I have never been able to grasp Crystal until I started reading this book. If you want to save yourself $1000 for training, buy this book.

I've only been working with Crystal for a few weeks but am already putting together some pretty decent reports. I could not have done it without this book. After such a short amount of time my copy is somewhat dog-eared and filled with yellow post it notes for quick reference to the things I need. It is open at my desk whenever I work with Crystal.

If you are a Crystal novice this book provides an excellent foundation for Crystal Reports. If you are an intermediate/advanced user there is plenty here for you as well. I especially like the financial twist the report provides since most of my reports are payroll, general ledger and accounts payable/receivable related.

The discussion forum associated with the book is also an excellent resource. I was "stuck" on a couple issues and was helped by both the author and other users on the forum.

Bischof's book is a complete, well-researched reference that quickly arms a novice Crystal Reports user with the techniques necessary to create sound, well-formatted financial (and other) reports. The appendix on Balance Statements and Income Statemens is a fabulous jump-start for those who must get up to speed quickly! If Crystal Reports is your platform for information delivery, this book belongs in your library.

The very clearly written style, REAL WORLD EXAMPLES!!!, and great technical content make this book a must have for Crystal Reports Development.

5 Stars

This is my first crystal report book and i can say this is the best crystal report book ever i found. Every chapters has a lot of Tutorials and Tips.

Not only is this a first-rate book on data analysis, it's also an absolute treasure trove of useful SQL. This book belongs within arm's reach of every data analyst, business intelligence professional, reportsmith, and, most happliy in my case, those involved in data quality. If I were pressed to find one thing missing, it would be coverage of MS Query, which is embedded within Excel and allows one to connect it directly to a database and execute queries against it, thus obviating the need to cut and paste. To his credit, the author does mention this capability in chapter two, but deems it outside of the scope of the book and therefore goes no further. Perhaps he and/or his editor might consider covering it in an appendix of a future edition, which I fully expect there to be several of--this book is a generous 600+ pages of hard-earned knowledge, and deserves every one of its five-star ratings.

"Data Analysis Using SQL and Excel" is an valuable resource for business intelligence and data mining practitioners in all industries. Having said that, I would like to offer some solid practical advice to potential readers that might not be fluent in statistics or data mining.

First, the reader should have a solid understanding of SQL. If the extent of your SQL interaction comes through a program on the level of Access, then you can still benefit from this book, but you will have to apply yourself more than others. Keep in mind, that proprietary releases of SQL might cause problems in directly translating the author's examples.

Second, if your statistics knowledge is a little rusty, have a secondary resource on-hand. Sometimes the definitions or explanations of the statistical concepts may not be as intuitive for some readers as they are for others.

With those caveats in mind, the reader need only to keep his or her patience and work through the concepts of the first 4-5 chapters. These chapters tend toward simple exposition of the concepts. For those with little patience, it may seem as if it is just a laundry list of concepts with little effort to tie those concepts into practical uses. Thinking like this is a great way to miss the enormous benefits of the book!

For me, the "Ah Ha!" moment came in Chapter 6 and 7. The concepts I had worked on in the previous chapters suddenly came together with customer tenure onward, when the techniques use will call to mind everything learned in the previous chapters.

In short, spend plenty of time in the first few chapters - the extra effort to master those concepts will only enhance the benefits of later chapters.

Lastly, there are a few odd differences between the text and the files downloadable from the web site. Whenever I hit a snag based on the text, opening the accompanying Excel files and seeing the formulas, queries or table/graph structures resolved all issues for me.

This is a text that will always have a place on my shelves.

If you work, like me, on data warehousing, data mining, analytical CRM or similar projects, this book will save you a lot of time, and provide you with a lot of inspiration.
Statistical concepts are clearly explained, and examples with very smart SQL queries and Excel sheets are shown.
For instance, no other book will explain you so clearly Survival Analysis, and how to practically implement it (I mean, with working code!).
As a previous reviewer wrote, why should you believe me? I'm one of the authors of another Wiley book, "MDX Solutions", and I earn my living by consulting with DaisyLabs, a Business Intelligence company.
Keep Gordon's book on SQL, and my book on MDX, on your desk, and no data analysis project will scare you anymore!

Having seen a multitude of books offering either statistical analysis techniques or suggestions around data mining tools, it is refreshing to see someone approach the subject using simple, readily available tools and a practical, business oriented approach to the topic. The apparently mundane subject of customer retention coupled with buying patterns and market basket analysis is laid out in an effective and sequential manner. The SQL examples take some getting used to but, once understood, offer a series of easily implemented and highly effective methods to illustrate the concepts shown in the book. As a reference guide and an illustration that one needs to know the questions to be asked of the data before investing in the latest drag and drop business intelligence tools, this book is unparalleled. The author has not stinted on providing a wealth of examples and explanation. If this tome is a reflection of how Mr Linoff and his team approach their real world consulting activities, they must be a formidable team indeed.

For anyone who has wrestled with a means to understand their customer buying patterns and product affinity patterns in their historical sales data, this book cannot be beaten

Wow - if you need a book that: 1. describes basic data analysis and statistical concepts in an easy to understand but thorough way. 2. uses real world business examples that you run into every day. 3. gives you the recipes of how to implement them in your business with real world computer tools like SQL and Excel. 4. and is written by a proven authority in the field (4 books and two decades of consulting). Then this is your book.

But why should you believe me? Just a little on my background. I wrote two books on databases and data analysis for McGraw-Hill: "Building Data Mining Applications for CRM" and "Data Warehousing, Data Mining and OLAP" and have led teams that have built data mining engines for super computers that later became Oracle's data mining engine, as well as implementing sophisticated data mining applictions (CART) in SQL and integrated between a relational and OALP database. Though I don't get to do a lot of 'data mining' in my current business I would definitely find this book very useful if I did.

Anyway, I thought this book was tremendously thorough in providing common sense explanations on everything from the Null Hypothesis to the Monty Hall Paradox (very cool). Buy this book if you want a single reference that will allow you to quickly solve real world business problems in a rational and doable way.

Phil.

This is another great DB2 book. I really like the blend of XML developer, database designer, DBA, and architecture chapters, which helps plug any holes in readers' perspectives. I just wish I had written a book like this myself. Instead I'll stick with yours.

Terry

This book is a must have for anyone working with DB2 databases on the linux, unix, or windows platforms. Chapter 5 Developer Workbench helped me to get up and running with the workbench and implement several stored procedures I needed for a project. Chapter 9 The Optimizer, Chapter 11 Monitoring, and Chapter 12 Performance provide great detail and insight into the monitoring and tuning of the database that helped me to build processes to monitor the performance of my databases. Phil's experience and dedication to DB2 makes this book a winner.

Mr. Gunning has done it again!
Having studied under Phil Gunning and knowing the dept of his expertise this book brought to life real world experiences in a classroom like setting. As a DBA I found the Chapter#8 on "Tuning Buffer Pools" and Chapter #9 "The Optimizer" to be of great help to me personally. This book is a great reference material for any DBA faced with the challenge of daily performance. I was excited to read Mr. Gunning's explanation of the `Utilities" incorporated in DB2 V9. I would recommend this book for any DBA or DBM who needs an in-depth understanding of developing and monitoring DB2 V9.
DeWayne Stansell DBA

This is a great book for developers because covers pureXML and other features and great to for DBAs the chapter on monitoring is a must have when you are in trouble with your database

Just keep in mind that this book is focues on the LUW(Linux, Unix and Windows) version of DB2, I say this because a friend of mine bought for using with z/OS by mistake.

I bought this book because I needed to get up to speed real fast on using the new XML data type and Developer Workbench, and Chapter 2, 3, 4, and 5 contained everything I needed to get started. I also liked the Chapter on the Optimizer and Monitoring and Performance. A good reference.

This is an excellent book. It helps the beginners of "Dynamical Systems" to understand this branch of Mathematical Physics using Maple. It is very useful for undergraduate students as well as for teachers.

A great book. Great web pages and short, easy to copy and edit
Maple programs. Lots of material not covered in other books on this topic. Maple is my favorite package. The others are not
as user friendly. I felt I must write again since amazon have been showing excerpts from book. What a geat idea. Chapters in this book that interested me were fractals, multifractals and
optics. Authors web-site is given on back cover of book. Enjoy!

Thought I'd give a more in depth review than the others here.

Most advanced math textbooks contain one or two chapters that turn me off. I must say that every chapter in this book had useful information or very good applications.

The opening chapter is a brief introduction to Maple V (some Maple 8 commands are posted on the books website). Note that Maple 9 is now out and no doubt Maple X will soon follow.

Chapters 1-7 cover planar systems in some detail, vectorfield in DEplot is a real winner here. Chapters 8 and 9 cover 3D and nonautonomous systems - the poincare command in Maple is a real time saver.

Chapters 10-12 cover a lot of research results on limit cycles - the most lucid I have seen in any textbook.

The remaining half of the book concentrates on both real and complex discrete systems. There are the usual cobweb diagrams, bifurcation diagrams and Mandelbrot set. Where this book comes into its own, however, is in Chapters 16-20.

Lasers and nonlinear optics are investigated using complex iterative maps. Fractals and even multifractals are discussed in some detail. The book ends with a chapter dedicated to chaos control.

Overall, the book is concise with pertinent examples and applications. It is not dogged down with math notation, theorems and proofs.

Strogatz, Perko and Allgood are good books to practice more Maple programing techniques.

This book is a very nice introduction to the theory of dynamical
systems. It covers all aspects and even more than usually thaught
in a class on dynamical systems. Especially, I like to see
many examples for various applications. These examples and the
Maple programs make it well suitable for students to learn
on dynamical systems by themself.

This is only book I find with program files that work right away. Graphics in Maple is excelent for chaotic system and algebra very powerful. I like to rotate figures in 3D and use animation. I learn more about optics, it nice to see complex numbers used in applications. Lots of other applications also.

Book is best for students who want to get programs working quickly. There is a website with working programs. You should also look at Maple Application website for many many examples.

I recomend book to everyone.

Excellent book on JMS,
topics in book like easy going ,
dont think just buy and read its worth

This is a very decent book for JMS. It works out well to learn the basics. It goes into good depth on the basics. After the basics your pretty much on your own for getting too advanced.

This book makes the process of learning JMS easy for all skill levels. Dr. Yusuf provides real-world examples in a language that is down to earth. He has assembled its content into sections for someone just learning JMS while providing code samples for the seasoned developer. I found the "how to" diagrams extremely helpful when configuring Enterprise JMS in WebSphere. This is a must have for anyone interested in JMS and how it's applied in an IBM WebSphere environment. This is an excellent book!

I found this book extremely useful. It is practical, well-written and provides the necessary ancillary information required to understand the topics. The author builds up nicely from messaging, to JMS basics, advanced JMS topics, IBM JMS offerings, hands-on scenarios(which bring it all together, especially for people who learn by doing), and deployment. In addition, throughout the book, the author provides implementation considerations, recommendations and best practices, which will be of great value to designers and developers alike.

I've been working with WebSphere for over 5 years (since the beginning) and this was still worth reading. Great book full of examples, step-by-step "labs". This is focused on WebSphere and MQ, but will be very helpful to those who wants to use MQ with any other J2EE server. If you are not MQ and not WebSphere user - this still will be helpful since it has great deal of JMS basics, but you will have to use your vendor's tutorials and examples instead of those in the book. Concepts are still the same.

There are no words adequate to convey the effect THE STONES CRY OUT had on me when I read it in 1986. It haunted me for years. I wanted everyone I knew to read it.

Just several years ago I met a woman whose entire family - her husband and all her children - died under the Khmer Rouge monsters.

Amazingly, after the stories Miss Szymusiak recounts: of the young girl who was killed for being too pretty, of those murdered for daring to exhibit signs of affection for one another, and of unspeakable tortures inflicted upon absolutely helpless and innocent people of all ages, the chapter which really drained my blood was the one detailing her witnessing the beginning of the purge. The author notes the young Communist cadres being themselves called in for interrogation and torture and disappearing one by one.

This is a chilling account of the darkest period in 20th Century history.

One of the earliest (1986) accounts from the survivors of the Pol Pot regime, "The Stones Cry Out" seems to have set the style and standard for another more recent child's-eye perspective on the same era, "When Broken Glass Floats". The minute details of everyday life, not abstract poltical assessments, form the basis for our childhood memories. The author's account carries an unvarnished realism which draws the reader into her film-like image of daily life under threat of starvation and execution. This is probably as close as a reader can come to the truth of events in Cambodia during 1975-79. Oral histories such as "The Stones Cry Out" are perhaps the best way for survivors of human rights abuses to indict the perpetrators. Sadly, tribunals driven by international politics are unlikely to have the same impact as the simple testimony of a victimized child. Highly recommended reading for all those with an interest in human rights, Cambodia, and Southeast Asian culture.

You need a strong stomach to read the grueling ordeal of a 12 year old girl in Cambodia under the Pol Pot regime.
The latter and his cronies turned a whole country into a concentration camp guided by the iron fist of a centrally planned economy which was based on rice production quotas.
Starvation and killing of whole families including babies were part of normal daily life. The author herself lost nearly all her family.
The slogan was 'be deaf and dump if you want to survive'.

Exceptionally, this book also relates the disturbing facts which happened in a Red Khmer camp in Thailand until one year after Pol Pot's defeat by the Vietnamese.

Molyda Szymusiak tells only the facts. She doesn't explain the overall picture of Pol Pot's regime, politically, socially, economically or internationally.
Therefore I highly recommend the eminent works of David Chandler as well as Philip Short's magisterial biography of Pol Pot (Saloth Sar).

This book shows painfully the disastrous consequences of a power grasp by ideological fanatics who created a one party state bureaucracy which wielded total uncontrolled power over the population.
This regime was a terrible shame for the left.

A very disturbing read.

Actualy I would rate this 4 and 1/2 stars.

Having read "First they killed my father" by Loung Ung It would be difficult for me to review this book with out comparing it to Loung Ung's memoir.

Both are essentially the same story, a young upper middle class girl living in Phnom Phen in april of 1975 when thier life, family and happiness are torn from them by the khmer rouge.

Many of thier experinces are similar as you might expect (long hours in forced labor, family deaths, witnessing murder ect..) but each has a unique story of thier own.

The writing styles also vary greatly and this is where Loung's "First they killed my Father is the better" book. Molyda tells her story in a very straight foward manner. Her discriptions of murder, torture and rotting corpses are alomost clinical in tone as if she is afaid to visit or express her real feelings at the time (and who could realy blame her) we are giving only hints about her family and life before April 17th 1975 (to be fair this may be in part to spare distant family members still in Cambodia from retalation)

In Loung's book however we are treated to two light hearted chapters discribing her life in Phnom Pehn before April 17th 1975 this gives the reader a chance to feel they realy know her, her brother's, sisters and parents thier strengths and weakness'.

Loung's memoir is far more emotional in tone and feeling leaving the reader almost gasping for air at points.

For those overly squimish that makes "The Stones Cry Out" the better of the two books. It is also the better of the two books if your sole interest is the surrounding history of the killing fields.

But for those just wishing to read a great emotional book "first They killed My father" is the better choice but I would highly recomend both to all.

My heart sank lower and lower with each successive chapter. This is certainly not a book one can read while couching comfortably on a sofa. If you are familiar with Cambodian history of the Khmer Rouge regime, this book is indeed a chilling read. But at the same time, one can't help feeling admiration for the author's fortitide in the face of unimaginable hardship and horror.

This book is a great guide for all FileMaker Pro developers interested in working with XML. Beverly Voth clearly has a strong grasp of both FileMaker Pro and Markup Languages. I found this book well organized, easy to follow and filled with useful information.

I've read many books regarding FileMaker Pro. In the few that mention XML, it is an afterthought. Beverly Voth's book is in depth, detailed and formatted in a manner that makes it readable, understandable and usable to both novice and professional developers.

The page layouts and presentation of the code and formatting is first rate. I was able to put what I learned into practice on day one of reading the book. This is a must have for all FileMaker Pro Programmers. I've recommended it to all my programmers. I recommend it to all who plan to ride the wave of the future with FileMaker Pro's XML features.

Ray Clements

Beverly Voth has written the "bible" on FileMaker Pro/XML integration. She takes what can be a daunting subject, and leads you logically from topic to topic, with demo files and plenty of code examples to illustrate her points. From the eight-page table of contents (in outline form) to the detailed index, this book is exceptionally well laid out, and has plenty to offer both the novice and the veteran FileMaker developer. This book does not suffer from the "we didn't have time, budget or inclination to proofread adequately" syndrome that plagues so many computer books these days... it flows beautifully, and I have yet to find a single typo.

The release of Beverly Voth's Guide is well worth our wait. While exhaustive, the writing is clear and not exhausting. She has given us the definitive textbook on this thorny, difficult subject, starting at the outside and working in. While breaking apart the various layers into edible morsels, Ms. Voth does not sugar-coat the complexities of her subject; she simply makes them disappear.

Finally a handy book that clearly explains XML and XSLT from a FileMaker perspective.

It is obvious when reading through this material, that Beverly Voth writes from experience. Her book is well researched, has a firm grasp of the FileMaker XML grammars and provides lots and lots of examples that make it easy for a developer to adopt this technology.

This book is full of useful tips, hints and clear explanations. There are many simple step by step exercises, XML and XSLT examples along with many do's and dont's that take the pain out of the development cycle.

The guide is complete with a useful list of resources, links and references and a glossary of acronyms and terms.

I use FileMaker applications everyday, I write stylesheets and now I always keep this book next to my computer as a quick reference and useful guide.

I owned the previous edition -- I bought this version because it promised new utilties -- intrusion detection, admin tools, ... for the most part, I have been happy. [The old edition provided the tools on a CD -- the new book has a companion Web site] -- trying to download the tools through my firewall can be challenging -- especially anything that has to do with viruses ...

That said, however, the new content is good.

The book has a definite slant towards Windows. But then ...

I have been building lots of Web clippings for the Palm environment. I needed a way to authenticate users. The book's discussion on Wireless protocols helped me implement a solution that works for the Palm and Web phones.

The book does a fair job of covering OS issues -- I recommend getting a book specific to an OS (such as Linux Exposed) if you need to protect a specific type of server.

The discussion on protecting ASP scripts was pretty good.

Over all -- worth the investment of money and time.

Very up to date book. Excellent reading (even though this is a text book for me~ Not boring text material). Great book

If there is a hacker-related book -- I have it ... compared to others, this book was easy to follow.

My Web site must support secure credit card transactions. The book's chapters on digital certificates, SSL, and e-commerce made the process almost cut and paste.

I also like and recommend Hacking Exposed.

Overall, this is a pretty good, general, beginner's book to network security.

For me, my main goal was to learn more about the OSI Model and how it relates to various security solutions I am investigating. The book does a pretty good job with the OSI Model and it explains pretty well the various technologies and techniques out there.

The fly in the ointment for this book is the fact that it has VERY little on wireless security. In fact, it only has one chapter and this one chapter dealt with all the different flavors of wireless technology. I was particularly interested in security solutions for wireless LANs and this book only had a page on WLANs.

This book did not mention WEP or 802.11b or any of the 802.11x flavors out there. I had to glance at the copyright date in order to make sure that it was published in 2002! I find this omission very strange but at the same time network security is network security.

I am going to stick with my four-star rating because it is a good general book but don't expect much depth.

On another note, does anyone else but me find it suspicious that this book got 3 positive reviews in the space of a week and then little else over the last few months? :-)

"This book is intended for researchers, practicing engineers, and students who wish to understand and / or develop fingerprint-based recognition systems." So the introduction, and right they are. The authors have chosen a more informal style, but still give some of the Mathematics necessary. The references are extensive and ultimately the reader will have to go to them to make a contribution.

I would recommend buying this book with "Automatic Fingerprint Recognition Systems" by Ratha and Bolle (ed.) It would be hard for me to make a decision between these two books.

Lo recomiendo si desean implementar nuevos algoritmos para reconocimiento de huellas dactilares y/o una revision a profundidad de como funcionan los metodos existentes.

Imprescindible concimiento de gradientes y algoritmos digitales en el tratamiento de imagenes.. para comprender el contenido.

This book first describes the different biometric systems that exist. It describes different methods of acquiring the fingerprints and the advantages and drawbacks from each method. Then it handles the different analysis methods for fingerprints in depth. The matching algorithms that are known with their evaluation is handled throughly with their indexing and classification methods. It discusses methods for fingerprint evaluation with the databases of NIST on DVD and the software sfinge for artificially making the fingerprints.

The part that is really new is the multimodal biometric system and performance measures of these systems. It also handles the individuality of fingerprints themselves and finally it gives an overview of methods for attacking fingerprints systems (denial of service, fake fingers, trojan horses, replay but also the electronic storage systems behind them). If you are in biometrics and also in forensic science, you certainly should consider reading this book.

This book is a "must". Very useful for my research on Biometrics and Multibiometrics Systems. No wonder this book received the 2003 PSP Award (Computer Science) from the Association of American Publishers.

The applications of Biometrics technology range from federated identity management to digital rights management, time and attendance, background checking, and homeland security. None of the biometric characteristics has received more attention till date than fingerprints. Fingerprint recognition is the most cost effective and accurate biometrics, which is evident from its rapid deployment in the widest range of security applications.

This book contains a plethora of information on every aspect of fingerprint recognition technology - introduction to biometrics and fingerprints, fingerprint sensing devices, feature extraction, matching, classification, synthetic fingerprint generation, multimodal systems, secure design, fingerprint individuality - you name it. The DVD accompanying this book will save you a lot of money and trouble of collecting your own data to test your algorithms.

The authors of this book - Davide Maltoni, Dario Maio, Salil Prabhakar, and Anil K. Jain - are undoubtedly some of the most well known and respected experts in the world on the topic of fingerprint recognition. It is no surprise that such extraordinary researchers have produced such an exceptional masterpiece.

Whether you are an inventor, developer, practitioner, forensic specialist, or system manager in this field looking for an excellent reference or just a novice looking for basic information on biometrics and fingerprint recognition technology, you must read this outstanding book.